HNHacker News
TopNewBestAskShowJobs

paulgross

231 karma · joined December 2, 2019

submissionscomments
paulgross··on Launch HN: Remora (YC W21) – Carbon capture for semi trucks
Thanks so much! Want to shoot me an email at hello@remoracarbon.com?
paulgross··on Launch HN: Remora (YC W21) – Carbon capture for semi trucks
1. The regeneration process actually requires very little energy because we're able to use waste heat from the truck's exhaust to power the process.

2. The tank requires 8 ft x 8 ft (on a 16 ft x 16 ft pad). The pump and refrigeration unit are small and are mostly off, so they don't use a lot of energy. Our early partners are also powering them using renewable energy, to further help our lifecycle emissions reduction.

3. Our understanding is that the price of CO2 varies geographically, so it will depend on where in the country we're capturing CO2. We're still testing the exact purity of our CO2, but it's definitely > 95% and we believe we can get it to > 99%. What purity does your company use?

4. It only takes trucks a few minutes to offload the CO2. They don't have to unload or reload anything - they just have to attach a hose and the device pumps the CO2 into the offload tank. We want to make this as easy as possible for drivers. Our first partners are actually very large companies that own private fleets of semi trucks and have aggressive climate commitments, so they have a little bit more wiggle room to test new technology!

5. That's exactly our plan. In the short term, we'll be earning revenue by selling to the concrete producers or other industrials. In the medium term, we'll be mainly be earning revenue by permanently sequestering our CO2 deep underground.

Let me know if I missed anything!

paulgross··on Launch HN: Remora (YC W21) – Carbon capture for semi trucks
Absolutely. One of our first pilot offloading stations is actually about 6 miles from a concrete producer. The other piece is that we'll add our technology to the tanker trucks that are transporting the CO2. It'll take us a few more years to get close to 100% capture, so between now and then, we won't be able to fully mitigate those extra emissions, which is why initially we're working with end users that are very close to our offload stations.
paulgross··on Launch HN: Remora (YC W21) – Carbon capture for semi trucks
We haven't explored that, but carbon capture technology would work for residential chimneys. The challenge would be figuring out how to pick up the captured CO2 from so many different locations. One of the reason we're initially targeting trucks is that they drive on extremely concentrated freight corridors, so we'll mainly have to collect CO2 from truck stops along a set of key routes.
paulgross··on Launch HN: Remora (YC W21) – Carbon capture for semi trucks
Lowercarbon Capital is amazing! You should definitely drop them a line.
paulgross··on Launch HN: Remora (YC W21) – Carbon capture for semi trucks
There are 230 million tons of demand for CO2 worldwide every year, and all the semi trucks in the US produce 340 million tons of CO2. Medium term, though, we're actually planning to start sequestering the CO2 deep underground in depleted oil wells in exchange for government tax credits, because we know the market for CO2 utilization is finite. Long term, we'd love to turn the CO2 back into synthetic fuel right at the truck stop where it's offloaded.
paulgross··on Launch HN: Remora (YC W21) – Carbon capture for semi trucks
Exactly. The challenge with hydrogen that we've seen is that it's extremely flammable (even when mixed with a small amount of air) so it requires thousands of pounds of reinforcement to make it safe to carry on a truck, which dramatically cuts payload capacity. (Carbon dioxide, by contrast, is thankfully not at all flammable.) Then, of course, there are the challenges with producing carbon neutral green hydrogen, since currently 99% of the world's hydrogen is produced using natural gas or coal. Plus building out a hydrogen distribution and fueling infrastructure all over the world.
paulgross··on Launch HN: Remora (YC W21) – Carbon capture for semi trucks
The device does not affect the aerodynamics of the truck or the power of the truck. It creates essentially no back pressure on the engine. In our beta testing, our device currently increases back pressure < 0.5 psi, which is nearly negligible. We’re confident that we’ll get this down to essentially 0 psi as we continue to test and improve the technology ahead of our initial pilots.

Our solution is complimentary with solutions like urea injection and diesel exhaust fluid!

paulgross··on Launch HN: Remora (YC W21) – Carbon capture for semi trucks
Exactly. We still need to do more dyno testing to get an exact figure, but we think the impact to fuel efficiency will be < 3%. We'll capture those extra carbon emissions, and we'll more than pay for the extra fuel cost by sharing the revenue from selling the carbon dioxide.
paulgross··on Launch HN: Remora (YC W21) – Carbon capture for semi trucks
Yes, that's exactly the proposal!
paulgross··on Launch HN: Remora (YC W21) – Carbon capture for semi trucks
This is a crucial question! To our surprise, our beta testing of our prototype has actually shown that this is creating < 0.5 psi back pressure on the engine (negligible) and we believe we can get it down to essentially 0 by the time we deliver our first units to customers this summer.
paulgross··on Launch HN: Remora (YC W21) – Carbon capture for semi trucks
Agreed. The concrete producers inject it into their concrete, which is widely thought to be one of the most permanent forms of CO2 storage in existence. We will only work with end users that are using the CO2 in a way that permanently takes it out of circulation. Medium term, this will probably mean that we sequester a lot of our captured CO2 in depleted oil wells or saline aquifers. Long term, we're actually hoping to turn the CO2 back into fuel right at the truck stop, so we can put it back into the trucks for a circular solution.
paulgross··on Launch HN: Remora (YC W21) – Carbon capture for semi trucks
Thanks so much for the interest! Feel free to email us at hello@remoracarbon.com.
paulgross··on Launch HN: Remora (YC W21) – Carbon capture for semi trucks
Exactly. We want this to be as simple as possible for folks to add to their existing trucks, so it's easiest for us to store the captured CO2 inside our device on the back of the cab.
paulgross··on Launch HN: Remora (YC W21) – Carbon capture for semi trucks
Right now, we're probably at around 60-70% lifetime reduction (we're doing a comprehensive lifecycle analysis during our first pilots this summer). Over time, as the capture rate of our device approaches 100%, we think we can get close to 100% CO2 capture (since we'll be capturing the emissions from the truck and from transporting the CO2 to an end user, the main source of emissions). The only other source of emissions is the energy used by the pump at the offload station, and our early partners are powering that with renewable energy.
paulgross··on Launch HN: Remora (YC W21) – Carbon capture for semi trucks
We've definitely got a lot of work to do to prove that this solution can truly be carbon negative (we're actually partnering with the University of Michigan to test this over the next couple months), but many scientists agree that "bioenergy with carbon capture and sequestration" is one of the most promising forms of carbon removal. With biofuels, we could remove carbon dioxide from the atmosphere for an order of magnitude less than direct air capture.
paulgross··on Launch HN: Remora (YC W21) – Carbon capture for semi trucks
I appreciate the fish pun! This is why we're currently offloading the CO2 every 600 miles. Luckily, offloading only takes a couple mins, and drivers are legally mandated to stop every 8 hours (< 600 miles of driving), so they can just offload while they stop, or at the end of the day. 600 miles worth of driving creates about 1,800 lbs of CO2, which is very doable to store onboard a truck.

To offload, the driver attaches a hose, which connects to an offloading tank, and the CO2 is pumped from the tank inside our device to the much larger offloading tank. We liquefy the CO2 as it comes off the truck for storage in the tank. Luckily, the pump doesn't use much energy, and our early partners are using renewable energy to power the pump! We plan to continue using

paulgross··on Launch HN: Remora (YC W21) – Carbon capture for semi trucks
We're starting with large companies that own their own fleets and have made aggressive climate commitments. We share the revenue from the carbon dioxide with them, so they have two incentives to install these devices: meet their climate commitments and generate a new stream of revenue from the CO2.

The device currently weighs 3,200 pounds without carbon dioxide and 5,000 pounds loaded with carbon dioxide, and it'll get a lot lighter over time. We believe our device will qualify as “idle reduction technology” under federal law, and as “near-zero emission” under California law, meaning a truck with our device can weigh up to 80,550 pounds anywhere in the United States, and 82,000 pounds in California (above the usual 80,000 lbs). So the hit to payload capacity will be less than the weight of the device.

The device is 0.30 meters x 2.27 meters x 3.14 meters. It covers the back of a semi truck.

The driver currently has to offload the CO2 every 600 miles, and we'll be significantly improving range over time.

For our early partners, we'll install a CO2 tank at a distribution center or another facility of their choosing. We'll install our devices on trucks that do round trips to and from the facility so that they can offload the captured CO2 at the end of the day. Then, we'll transport the CO2 from the facility to a nearby concrete producer in a tanker truck (equipped with our device). As we grow, we will install CO2 tanks at truck stops along our partners' highest-density routes. Our network will grow organically as we begin to work with more and more companies.

paulgross··on Launch HN: Remora (YC W21) – Carbon capture for semi trucks
Our adsorbent actually captures the CO, NOx, and SOx in vehicle exhaust, so we'll be taking those out of the air in addition to CO2! Any particulate matter that makes it through the diesel particulate filter will cake onto our adsorbent, which we believe actually makes it more effective, so we'll be taking that out of circulation as well.
paulgross··on Ask HN: Who is hiring? (March 2021)
Remora | Detroit, MI | Full-Time, Onsite | https://remoracarbon.com

Remora is an early-stage climate tech startup backed by investors like Y Combinator and Chris Sacca. We're building a device that captures the carbon emissions from a semi truck. We sell the captured carbon dioxide to concrete producers and other end users, helping companies earn new revenue while meeting their climate commitments.

Remora's founders include a former EPA scientist who pioneered mobile carbon capture during her PhD, and a former diesel truck mechanic who went on to build hydrogen and electric semi trucks for some of the world’s largest automotive companies.

We're rounding out our core team, and we're looking for mechanical engineers who learn quickly and care deeply about tackling the climate crisis. Climate change disproportionately impacts communities of color, so we're particularly looking for engineers who have demonstrated a commitment to racial justice. Everyone on the team earns the same exact salary ($80K!) and everyone owns significant equity.

Please apply at https://remoracarbon.com/join

← PreviousPage 2 of 2