HNHacker News
TopNewBestAskShowJobs

rhizome31

1,097 karma · joined April 16, 2011

submissionscomments
rhizome31··on Music Production on Guix System
To those who wouldn't realize, this message is from the creator of Ardour. I suppose he's tired of hearing the same complaints again and again so he decided to pack them all in a single message.

I'm not going to talk about how much I like Ardour because I feel guilty for not having donated yet.

rhizome31··on Anu: A sound, distributed version control systema
And I was expecting version control for sound files.
rhizome31··on The Russian vaccine for Covid-19
I may be wrong but it seems that the number of confirmed cases isn't a great indicator either because we've been testing a lot more so it's expected that we're getting more positives. What matters is the number of people who die or get seriously ill, isn't it?
rhizome31··on Bakeware – Compile Elixir applications into single executable binaries
Thank you for your detailed message. I haven't understood everything you wrote but it seems that basically all that complexity comes from supporting hot code reloading.

Given that a lot of (most?) Elixir devs don't use hot reloading, having a less powerful but simpler deployment alternative seems like a good idea.

rhizome31··on Bakeware – Compile Elixir applications into single executable binaries
But then you need to install Erlang/Elixir on the server, which kind of defeats the purpose of releases, don't you? Or have you abandoned releases altogether?
rhizome31··on Bakeware – Compile Elixir applications into single executable binaries
My experience is that preparing a release is much more straightforward since Elixir 1.9, which added release support to the Elixir standard distribution. That said I tend to treat a release as a black box, I haven't tried to understand what all those files are and I just interact with bin/myapp.

However I still have two complaints.

First, the system on which the release is built and the system where it's going to run need to be similar (same version of the same Linux distribution). In practice this means that these days we build releases in containers matching the target host.

Second, releases can't run mix commands so we have to write boilerplate code specifically for releases for things like database migrations, etc. It would be nice if writing app management commands could be a bit more DRY.

I could be wrong but at first glance it doesn't seem that Bakeware addresses these issue.

rhizome31··on David Graeber has died
Yes, about one month after Bernard Stiegler passed away, this is a sad succession of losses.
rhizome31··on David Graeber has died
Yes, to give a bit more info, this is an anthropology book. You will learn about incredible customs from various societies around the world and history. It also often touches on feminism because the main topic of the book (debt) and the situation of women are often tightly linked.
rhizome31··on Italian Ruby
> why would anyone write code in his/her native language?

Well, actually, a lot of people already do.

rhizome31··on The new Jupyter Book
From the top of my head:

- captures creativity into a centralized proprietary platform on which creators have no control

- modal dialogs nagging you to create an account when you just want to read an article

- uniform, soulless, dull visual design

- heavy pages loaded with JavaScript that don't add any value for the reader

rhizome31··on React v17.0 Release Candidate: No New Features
> As a mostly Python and only occasional JavaScript developer, it always felt like the biggest challenge in the JavaScript community was how fast everything moved

Those of us who were doing Python web dev in the years 2000s might remember that Python went through a similar period where it seemed that every week a new backend framework came out: Zope, CherryPy, web2py, Pylons, Django, repoze.bfg, TurboGears... to name a few. Nowadays it seems that everybody has settled for either Django or Flask. It might not have been as crazy as what happened with JavaScript in the years 2010s but still I tend to see a similar pattern. People try a lot of different things, going in slightly different directions and eventually interesting approaches get identified and communities build up around a couple of solutions.

Meanwhile the Ruby community was able to build consensus around Ruby on Rails, with just Sinatra on the side for small projects.

I'm wondering if this ability to try many different things might have been the cause for Python building numpy and eventually winning the scientific computing area as well.

rhizome31··on Toshiba formally and finally exits laptop business
Lol, mine is simply nicknamed "Toto", which here in France is the equivalent of "foo" and also a naughty child character in jokes.
rhizome31··on Toshiba formally and finally exits laptop business
Living without the social stigma associated with IT work (at least in western countries) is also an incentive. So many times I have seen faces changing when I say that I work as a SD. It's a real attraction killer. I even once had a lady who wouldn't believe me because I was "too cool" to do this job.
rhizome31··on Is Dark Mode Such a Good Idea?
It depends on the amount of light. Try reading a book outside on a clear summer day when the sun is at its zenith. Your eyes won't even stand it. It doesn't matter that the light comes from a direct source or from reflection. We can easily imagine more extreme experiments using mirrors and spotlights.
rhizome31··on Is Dark Mode Such a Good Idea?
White paper reflects light.
rhizome31··on Zettelkasten note-taking in 10 minutes
Reading the linked article I'm very surprised that the author says they can't talk about what they read after reading it. I'm quite the opposite as I often talk about what I've read to my friends, even before finishing the book. Sure I might not remember things as well a year later, but then I can go back to the ToC or index and find the bit I've forgotten. Saying that books don't work in general doesn't ring true to me.
rhizome31··on Ask HN: Are my expectations on code quality and professionalism too high?
Unfortunately I have to second this advice. There's very little chance you'll be able to make things change so better to move on now than when you're depressed in a few months or years.
rhizome31··on Ask HN: Are my expectations on code quality and professionalism too high?
This seems below average. No tests or code reviews is common but pushing directly to prod or connecting to prod databases is unusual. It seems you've gone from one extreme to the other. From what I've seen, even at companies were people work in silos producing untested spaghetti code, production is protected. In any case, among small companies, you'll have a hard time finding the same level of quality you were used to. I'm not saying they don't exist but I'd say it might be 10% of them.
rhizome31··on Debian Handbook for Debian 10 Buster
I've never installed Arch, but regularly end up finding the info I need on the Arch wiki. Amazing resource indeed!
rhizome31··on AudioMass – free, open source, web-based Audio and Waveform editor
After a bit of struggle I found that Pulseaudio over Jack adresses my needs. Music production software connects directly to Jack and all other software (browser, video player, etc.) uses Pulseaudio. Also the Cadence GUI really helps to set this up correctly.
rhizome31··on Software will eat software in a remote-first world
I had a similar experience in France in the early 2000s. I went to the unemployment office (ANPE) to ask for a training and they told me that software was a dead end and that it wasn't possible to get training. So I did my own research, found a training organization and went back to the unemployment office giving them the exact reference of the training I wanted. The exact same person then reluctantly pulled a drawer of her desk and gave me an application form. That training kick-started my career in software.

Another thing that was commonly said over the 2000s period is that all software jobs would be quickly outsourced to India. That didn't happen either. Some big companies obviously tried that (and some still do) but a lot of them eventually realized that software wasn't something you could just specify and outsource to a team far away, with a different time zone, culture and language and expect to magically get working software as a result. In the meantime, I think that demand for software in India has also grown. I laughed at loud when in the early 2010s I received an email from an Indian recruitment agent offering me to come work in India.

rhizome31··on Show HN: A WebGL Tribute to Tron, the movie that made me fall in love with CGI
It didn't work on mine. There was a loading screen and then it pretty much froze the browser and I had to kill the tab.
rhizome31··on Ask HN: How to self-host comments on your otherwise static blog?
Come on people, the OP asked for a self-hosted comments solution. The number of OT replies is excessive, particularly when the same OT reply is repeated by several people.
rhizome31··on Advanced Programming Languages (2009)
There's Matrex, which is based on CBLAS and has some integration with IElixir, Jupyter's kernel for Elixir.

Also someone seems to be doing interesting work to integrate with GPU at https://github.com/sasagawa888/deeppipe2

Of course that's not to say that Elixir is ready to replace Python tomorrow. I just wanted to mention interesting projects in this area.

rhizome31··on The pervert's guide to computer programming languages (2017) [video]
Me too, but I'm also a hysterical fetishist. So the more programming languages you use the more insane you get! Seems pretty accurate ;-)
rhizome31··on The pervert's guide to computer programming languages (2017) [video]
Not sure why Erlang is in the sadist category, along with Perl and Regexp, since it's one of the most readable language I've encountered. I get the fetishist part as it emphasizes a specific paradigm but sadist seems unfair. It might be because the syntax is slightly unusual but it's in fact quite simple.
rhizome31··on Vim rendered on a cube for no reason
Make sure to sure to check the issues as well.
rhizome31··on Ask HN: Which configuration management software would/should you use in 2020?
I operate a couple of Elixir apps and so far a simple Makefile with a couple of shell scripts has been enough. This simplicity is due to the fact that the only external dependency is a database server, everything else (language runtime, web server, caching, job scheduling, etc.) is baked in the Elixir release. One unfortunate annoyance though is that Elixir releases are not portable and can't be cross-compiled (e.g. building on latest Ubuntu and deploying to Debian stable won't work) so we have to build them in a container matching the target OS version. So to be really honest I should mention that Docker is also part of our deployment stack, although we don't run it on production hosts.
rhizome31··on Using Anki to remember what you read
When I went to Greece I learned it in a few days just by trying to read all the signs I could see. I guess the trick is not to learn isolated letters but learn to read common words.
rhizome31··on A Hitchhiker’s Guide to Asynchronous Programming
Also, if you do a lot of concurrent programming, you should consider platforms with lightweight processes (as provided by Erlang/Elixir, among others). I find code based on this paradigm much easier to write and debug than async code and it comes with additional benefits such as error isolation and the ability to parallelize CPU-bound tasks.
← PreviousPage 4 of 15Next →