(sorry if they in the video - I generally don't watch the videos before reading the text first)
9,701 karma · joined May 4, 2016
(sorry if they in the video - I generally don't watch the videos before reading the text first)
- For ingress, you use special "file transfer" software. Run the receiver on secure side, run the sender on insecure side. It blasts the file "blind" - it has has no way to know if anyone ever received it. Make sure the receiver is fast enough, and the error-correcting codes are a great idea too, as they don't need feedback. It's up to user to want to secure side computer and check that the file was received without problems. Yeah, this is similar to sneakernet, but more secure, as you can't accidentally carry a virus on seemingly-empty drive.
- For status egress, you have secure side broadcast status periodically, say every minute. Insecure side receives the status, updates the database, and runs the regular web server to share the status. Again, secure side has no way to know if someone is listening on the other end, it just blasts out the messages and it's done.
And you are correct, if the secure system has both egress and ingress diodes, it is no longer isolated, and devious enough malware can establish two-way communications. But even if it won't save you from Stuxnet, the simple fact that it is no longer possible to have direct network connection to the outside raises security bar quite a bit - all the ideas about "let's just open this one port on firewall, it'll fine I swear" are completely stopped.
(Which reminds me of something in GP's (mikewaro) message: _why_ would a data diode need a promiscuous mode? Given every single data diode I have seen needs a special software on both sides, you should not need anything beoynd a basic TCP session)
> The technology to eradicate mosquito-borne disease already exists.
One approach is eliminate one specific kind of mosquitoes, another is to change them so they don't carry diseases. Either way, we'd still get mosquito bites.
Many servers I've owned had multiple years of uptime, and the only reason they'd go down is because they will get decommissioned or because of power outage.
The article says:
> disk drives, power supplies and some other components have been replaced but Hogan estimates that close to 80% of the system is original.
so I am guessing there was no reboots, nor CPU replacements.
> The algorithm only works if a raw signing oracle is available. Most RSA usage in practice (that is, RSA signatures using PKCS#1v1.5 or RSA-PSS padding) do not expose such an oracle, and thus this attack does not pose a practical risk. Examples of RSA use that do expose such a signing oracle would include blind RSA signatures (e.g. Privacy Pass) or HSM APIs.
> Are people actually still using RSA?
> Yes, particularly for digital signatures (e.g. certificates, TLS handshakes, tokens, OAuth). Key exchange for protocols like TLS uses ECDH or has transitioned to ML-KEM, and the attack does not apply to these algorithms.
This is breaking only some rare kinds of RSA usage... And if you are considering new system that uses RSA signatures, please don't. Use elliptic curves - the operations are faster, the signatures and keys are smaller, and there are fewer attacks.
Even PrivacyPass stopped using RSA signatures for that reason [0], which means that the only example of applicable technology is no longer correct.
[0] https://blog.cloudflare.com/privacy-pass-the-math/#previousl...
One could achieve the same with a Telegram bot, right? And unlike your app, which must be installed separately, there are already 1 billion users who already have the app installed.
If Open Tools decide it's not worth it to sell replacement parts? Or they decide to raise prices 10x? Or they get bought and discontinue the printer? Then the community is dead.
You will have the drawings so for plastic parts, so in theory you can 3d-print them yourself / send them to print house, but on only for personal non-commercial use. But larger parts have large minimum order/setup costs, and "group buy" orders are illegal under NC licenses.
(yes, they say all parts are either 3d printed or standard.. I don't think it is true, the photos show custom-bent metal parts and clear plastic which looks injection-molded)
The "halt" program is mainly scaffolding: ascii graphics, terminal startup.. and some very simple UDP code, with "linchpin" being a simple check if the new state is valid or not. This is something that beginner students write as one of the first distributed systems labs, not some grand invention or a demo of some new principle.
Again.
(1) what is the specific problem you are solving,
(2) how are you solving it
(3) what are the alternatives and how is your thing better/different than them
Right now, your website answers none of them
This is written as it is some sort of a great invention, but seems to lack of actual "meat" - I don't see any novel algorithms or ideas there, just some basic replicated data structures, even simpler than CRDTs or blockchain's network consensus.
But there is tons of pseudo-philosophy, making up new terms, and trying to make a it sound deep and mysterious.
Author: if you want to be taken seriously, add one-page intro about (1) what is the problem you are solving, (2) how are you solving it, and (3) what are the alternatives and how is your thing better than them. And (3) is especially important here, it's the difference between clueless person bamboozled by AI and someone who is actually familiar with the field.
> For many users, however, the actual experience is roughly just "stupid thing sucks." Software already feels capricious; more failures just change the rate of frustration.
I am betting author does not use cloud services much. It is not just "users", it's developers as well. Github is returning 5xx? AWS service does not work? Your email did not get delivered? Nothing we (developers) can do, "stupid thing sucks".
> The class instances have to be manually freed, otherwise you get memory leaks.
manual memory management in 2026?
The argument is not "pay taxes or we kill you", it's "pay taxes or get out of our town". No one is a slave, if the government asks for too much and provides too little, people will move.
I live in a town with non-trivial taxes. It was my personal decision to move there, no one said "move there or we kill you". When choosing a place to live, I could have moved to some other city/state/country with lower taxes, but I've decided not to. I like that we have working utilities, parks, roads, schools, law enforcement, stores. The town had a vote to increase town tax to raise money for schools and libraries, more than 70% approved.
I don't care about your ethical reasoning about tax types, if you want to live in my town, you contribute to the town's well-being. If you refuse to, on any grounds... well, maybe some other place will be a better fit for you.
A hedge fund or a lawyer office with with a huge income but a a small office pays some tax. A sandwich shop close to them which barely had ends meet pays the same amount of tax.
I believe we should tax hedge funds much more than sandwich shops.
> Again, my assumption was basically that this was just the language model generating a really elaborate narrative.
> That doesn't mean I believe it was actually a non-human intelligence. I can't prove that. I can't even establish that the material came from anything other than the language model itself.
> Or maybe there's something else going on. I don't know.
I think that's the textbook case of AI psychosis..
At least in the US, the traditional taxis were terrible - only way to order is via phone call, you have no idea when your car will arrive, nor how much your trip will cost, there is no easy way to send feedback to driver, and there was a good chance for an generally unpleasant experience...
Uber/Lyft changed this all and actually made the car-for-hire services usable. In my circles, this was the real reason why everyone simply stopped using taxis completely the moment any alternatives appeared.
And Waymo has a nice app and clean experience, and won't take you long way so it can charge you more, hence people group it with rideshares, despite it technically being closer to taxi.
(I understand that in other countries, taxis were much better. Before Lyft, I always felt envious while reading about their taxi systems)
> When banks are asked to finance businesses that are run in part by agents, what proof will they accept? A dashboard? A screenshot? A performance report written by the same agent that spent the money? No underwriter on earth should accept that. Eventually none will.
Good, that's exactly what we need. People believe Big AI companies way too much. We need loud, widely-published stories of AI agents making horrible decisions and wrapping them in beautifully-formatted reports, so that a layman working with AI knows it will lie with the straight face, and even that smart-looking, cleanly formatted report might have a completely incorrect content.
Usually, when the same code can be written either as range-based "for" or as a "while", the "for" will look better and have fewer possibility of bugs. If you have examples otherwise, I'd like to see them.
(Note I am specifically talking about range-based/iterator-based "for", not the C's variant. Nor am I talking the cases where the "for" is hard to use, like when the size might change at runtime)
todo_iter = iter(todo)
while True:
try:
value = next(todo_iter)
except StopIteration:
break
process(value)
or like that? todo_iter = iter(todo) # Note: assume "todo" does not contain None
while value := next(todo_iter, None):
process(value)
I'd say neither of those are as clean as a simple for loop: for value in todo:
process(value)
and yes, that's the case of a personal preference, although I'd bet a lot of Python programmers will share that preference with me. That's what "code smell" means, after all - it's not a bug which is clearly incorrect, it's a code which is best avoided based on reviewer's personal experience. i = 0
while i != len(todo):
process(todo[i])
i = i + 1
sure, there may be a good reason to implement things this way (maybe "todo" grows during iteration?), but maybe not, and then the loop should be instead simplified to: for value in todo:
process(value)
(as an aside, this is exactly the case where the comments are required: "# not using for loop because todo might grow" will make it clear it's an intentional decision and not hallucination or something written from ignorance)(not a JS dev myself, but I read HN so I see those posts every once in a while..)
huh, did not expect this. I wonder how many vehicles currently on road would fail those checks if the NHTSA started to pay close attention?
Python 3.13.5 (main, Jul 15 2026, 20:25:40) [GCC 14.2.0] on linux
>>> x = [[n]*1000 for n in range(1000)]; import timeit, itertools, functools, operator
>>> timeit.timeit("len(list(sum(x, [])))", number=10, globals=globals())
13.009033881127834
>>> timeit.timeit("len(list(list(functools.reduce(operator.add, x, []))))", number=10, globals=globals())
12.941937348805368
>>> timeit.timeit("len(list(itertools.chain.from_iterable(x)))", number=10, globals=globals())
0.0706032607704401
>>> timeit.timeit("out=[]; [out.extend(i) for i in x]; len(out)", number=10, globals=globals())
0.06334403157234192
>>> timeit.timeit("len([i for a in x for i in a])", number=10, globals=globals())
0.1232151910662651
mutable is fastest, itertools is just a bit slower, list comprehension is 2x slower, both "sum(..., [])" and "reduce" are 200 times slower!If you are multiplying, you are likely doing heavy math, and you'll be using numpy - which does not need reduce either.
If you are going to return a list of dict, then it's much faster to mutate the results, so using "reduce" will have significant performance implications (unless you want to return input argument, mis-using it as a glorified "for" loop)
And if returning not a list/dict, if you can use "min" or "max" or "any" or "all" or "next" (take the first element), then you should use it - it will be easier to read and faster too.
So what does this leave us for "reduce"? Frankly, not much. I've only seen it in merging immutable status codes, and that was pretty niche usecase to begin with.
(this was all for Python. In other languages without nice list of built-ins reduce might make more sense)