480 karma · joined April 14, 2013
Fit your gel cell with an auto accessory socket, then plug in the power supply.
Mini-box has a number of dc-dc converters and battery charging systems for gel-cell and other batteries. I do not have personal experience with their products, but I'd try them first if I wanted something other than a hack.
For hacks there are tons of boost converter boards on eBay/aliexpress, but these typically don't have chargers, short protection, or other features you might want if you need more robustness
Code: https://github.com/machinekit/ PRU links: http://blog.machinekit.io/2013/06/beagle-bone-pru-links.html
I keep a copy of the FreeNAS's storage on a second DIY NAS running NAS4free, which is the original base from which FreeNAS was forked some years ago.
One popular thing I don't do with my NAS boxes is run any non-NAS services e.g. media streaming, etc. For me it feels like an unnecessary risk to important data.
I think Amazon's ultimate success is predicated on eventually developing a higher margin business.
It seems many previous businesses founded on the low cost producer strategy, e.g. Dell, uses it as a means to get scale, then emphasise higher margin products and services.
https://www.ornl.gov/news/ornl-achieves-milestone-plutonium-...
I've had no problems performing Windows 10 clean installs on several machines, but have been far too skeptical to believe Microsoft could pull off a mass upgrade of the Windows 7/8 installed base.
I wonder what upgrade failure rate they deemed acceptable during their deployment testing?
Is this engraving position registration tolerance correct, or a typo? If +/- 3 mm is correct, then it would certainly rule it out for my application (control panels)
For the merchant ship application, it seems a reach to believe that the benefits of greenhouse gas reduction can be most efficiently achieved by replacing diesel engines with nuclear reactors.
[1]http://www.oregon.gov/energy/nucsaf/docs/naval_nuclear_react...
The advantage in being able to actually listen to a real-time simulation modeled at the level of resistors, capacitors, inductors, and tubes or transistors is that one would be able to immediately hear the effect of component value changes, rather than just see them on the transient or frequency response plots.
Modeling the system at the level of DSP blocks would be more computationally efficient, but then one is left to derive the equivalent analog circuit. It's not rocket science, but it does add a level of indirection.
In any case, being able to simulate 5 triode sections and the linear filters between them in real time at a 48 kHz sampling on a modern CPU very well might be good enough for rock and roll. My use case is a design tool, not to obtain a substitute for a physical device.