As for gear ratio -- depends on which joint, but Harmonic Drive's standard gearboxes come in ranges of 50:1 to 320:1, and I'd say they were all within that range.
As far as direct drive motors go, all I can say is that I was very aware of them, and very interested in looking at it. (I was on the embedded systems team doing motor control), but by the time I joined, the architecture had already been decided and robot's were being built. That said, there are certain other difficulties there, both with the control electronics for larger motors, and with the relative cost of the motors, especially since Rethink is going for the goal of reducing robot costs. I can't say they won't go that way some day. I think at the very least, it's worth exploring, but I'm not longer there so I don't have much say in that!
Other fun stuff -- Even though we used a harmonic drive, it was coupled to what is basically a torsion spring between it and the output. This arrangement is called a series-elastic actuator, and it allows you to do some neat stuff with rapid torque sensing, both from the control and safety side of things. It's also a lot of fun for the control engineers trying to control something sitting at the end of a spring :-P