For example, I have a devboard that only support 1 GiB of DDR2 RAM, but it's a 64-bit system and the memory controller on the CPU was supposed to support at least 2 GiB of RAM. Meanwhile, another board that uses the identical chip runs 2 GiB RAM without problems.
The engineers of the devboard briefly explained that the problem was electrical. The memory controller itself has inadequate drive strength, adding more RAMs would increase the load on the DDR bus and destabilize the system. On the other hand, the other board had better PCB layout so the problem did not occur.
So it seems memory is a general problem among Mini-ITX boards? Perhaps the reason is that these boards have less available space for routing, fewer layers, and targets a lower price, so they trend to have worse electrical characteristics?
The BIOS does a (relatively) quick memory check in the POST to detect how much memory is actually available, basically by writing a series of patterns to all addresses and then reading them back to confirm; some desktops have a "fast boot" option which mostly skips it (I believe it's something like testing one byte per 4KB instead of every byte), and servers usually have a much more thorough test that can take many minutes.
The best way to check whether the memory is functional when 16GB is detected is to run a memory tester like MemTest86.
https://hardforum.com/threads/hp-proliant-microserver-owners...
> It seems to be confirmed, that these wonderfull little boxen can actually support 16Gb Memory, not the 8Gb HP Says they are limited to.
So it would appear that HP doesn't officially support 16Gb, which puts us firmly back in the territory of this post, YMMV, etc.
The Synology web UI only shows 8 GB and it breaks the graph display in the memory usage monitor (although when I first installed it, it used to show 16 GB but after some update, or random reboot, it stopped. Haven't tried rebooting to see if it's just random)