ATX 5V is really unsuitable for USB power, and can play tricks on you.
Similarly, 3.3V from PSU is useless at powering 3.3V logic.
You have to do power staging on board to guarantee that PCI and i2c stuff turns on after the bridge/soc.
Some PSUs don't follow reset timings, or don't do them at all on standby rail.
So if you do ATX power by the book, you may end up with improperly inited board, and 3.3V ICs booting up before the CPU.
So, yes, most of ATX power supply functionality is already duplicated by most mobos
Would you mind elaborating on this?
Ringing on some PSUs.
Out of spec ripple on most PSUs.
Why? I don't think current motherboard duplicate 5V converter.
>you may end up with improperly inited board, and 3.3V ICs booting up before the CPU.
Why it cannot just hold reset line for these chips high until CPU started?
Tip: If anyone tells you power supply and reset sequencing is 'easy' ignore them.
It helped that in those days there was one IBM making the PCs.