> The LCC (Liquid Cooled Condenser) was probably not designed to be mounted horizontally so they added the cinch strap which needed edge protection to prevent crushing the condenser contact surfaces... enter corner molding from Home depot. Will be interesting to see if that corner molding holds up over time. The cheap stuff is mostly air, the better stuff has more plastic content. If you do 3D printing you know what "fill" means..... look how the strap crushed the plastic corner molding in this photo. If it crushes/compresses it more over time.. the strap will be lose and the condenser will shake/possibly stress crack at it's base?
I did like this sarcastic response to it:
> See OP??? The Home Depot wood trim on yours exceeds the factory spec! At least it will not get crushed by the strap because it's not cheap plastic corner trim from Lowe's like others have.
There are a couple things I notice when I look at the shortage workaround. 1.Fake wood pieces are longer than the proper plastic piece(Why?).
2.Fake wood pieces are wrapped in green tape, proper plastic piece is not.(Speculation, metal strap edge cuts into fake wood. If so, how long will tape hold up with vibration?)
3.At least 2 different materials were used as a substitute, are these materials equivalent? Is there confidence in the supply chain of these parts that there was not a bad batch that will fail under heat or stress?
4.Overall quality of workmanship. In two of the 3 pictures, the lengths of the 2 fake wood pieces do not match. This points more to a production line workaround than a sanctioned fix.
5.The proper plastic piece has a larger area in contact with the cooler assembly than the fake wood pieces. This will result in more force being transferred to a point and possibly resulting in crushing damage to the assembly.
I work in a facility that assembles heavy off road equipment, we do sometimes use BOM parts if we encounter a shortage. Unless the part is identical in fit and function i.e. using a slightly oversized hose clamp, we will go back and rework the machine so that it conforms to our quality standards before we ship it.
If I was tasked with coming up with a replacement for the missing part, I would propose something like this: https://www.grainger.com/product/GRAINGER-APPROVED-Edge-Prot... Rather than use something that looks obviously out of place.
The fact that it's needed in a complex machine shows that it's not one that is precisely made, I would think.
The engineer who made this decision has a burden of proof to his boss (and maybe regulators, don't know) to show that this is safe.
The random internet commenter suggesting it is unsafe has a burden of proof to show that either it is actually unsafe, or that at least that Tesla didn't internally meet it's burden of proof.
(I say this as someone who is short $TSLA right now [and a non-practicing Mech E]; this looks perfectly reasonable to me.)
1: Compressive strength of wood perpendicular to the grain varies but you can estimate with a healthy safety margin about 200 PSI. 100x - 1000x weaker than metals, but still not zero.
The same company that erected a factory-in-a-tent (unconventional but also appropriate) to hit aggressive production targets seems like one that would consider and execute appropriate but unconventional substitutions.
I guarantee you that the materiel is not "wood" and is indeed much weaker in all relevant parameters. And I suspect that no one at TESLA has any real handle on the compressive strength of this material.