I used ws2812b leds, wemos d1, and a level translator since the d1 has 3.3v gpios but ws2812b technically requires a 5v signal.
I used ws2812b leds, wemos d1, and a level translator since the d1 has 3.3v gpios but ws2812b technically requires a 5v signal.
I have two rows of 32 lights, so a beefy supply was needed along with a few places where VIN was fed to the strip.
I drive the wemos d1 and led’s from a 12V battery with a 12-5V stepdown converter. I attach the 5V to the esp and the led’s. The 3.3V logic level works on the first led and is repeated at 5V to all subsequent led’s.
The power lines do sustain voltage drop over longer sections, so you'll want to add extra power every few meters.
As you add more LEDs you have a greater chance of one at the end not lighting up or having incorrect colors throughout the string.
0.7 * 5v == 3.5v, and 3.3 < 3.5. You're out of spec for the part and can't expect it to work reliably.