RISC has had its moments. Way back, it was better than CISC because the simpler instructions allowed a higher clock rate. Then CISC CPUs turned into RISC CPUs with a CISC-to-RISC translation on the front end. With that in place, there was a whole stretch of time where the only real advantage that RISC had over CISC was that RISC didn't have to have a lump of silicon that translates CISC into RISC instructions.
However, now there's enough space on the die for a CPU to have lots of parallel execution units, and the part of it that became really difficult to scale was the CISC-to-RISC translation unit, because each CISC instruction had an unpredictable length, making working out which instructions you can translate tricky and silicon-consuming.
And so RISC has a significant advantage once more, and that is the ability to vastly-simplify the part of the CPU that feeds instructions into the execution pool, compared to a CISC CPU, because the instructions are fixed-length. This allows this part to translate more instructions per clock cycle than a typical CISC CPU can, and this is what gives the improved performance.
> CISC-to-RISC translation on the front end
I would naively assume that this would be an advantage, since you could easily change the hardware used for any CISC instruction, finding better ways to make it faster. The "work unit" is more abstract, so you could throw the whole problem at dedicated silicon. Or, you could remove dedicated silicon, and just have the CIST spit out a list of RISC instructions.
It seems that, for RISC, you could never throw a more abstract "work unit" at dedicated silicon, without buffering instructions, to see if the intent matches the accelerators. Chip specific compilers would almost be required, to handle the abstraction.
In comparison, a RISC instruction decoder knows that each instruction is the same length, so each instruction can be decoded without depending on the ones before it. This simplifies the decoder so much that it makes it possible to decode four instructions per clock cycle without investing in too much silicon to do it, and while keeping a high clock speed.