I remember one time an engineer was testing a 16x(?) CDROM drive, and the disc inside broke. That was a real mess. :-)
I remember one time an engineer was testing a 16x(?) CDROM drive, and the disc inside broke. That was a real mess. :-)
If it was a 16x DVD drive then that would probably explain it.
Mostly unrelated.
Now a slight pet peeve of mine was an episode of Mythbusters where they tackled the issue of exploding discs. The issue was the Adam took the data transfer rate of 7.2MB/sec and then extrapolated this to the inner disc area and came up with 30,000 RPM. About 3 times faster than what the discs actually spin at. So naturally discs start blowing up every time they ran the experiment.
Adam assumed a constant linear when drives are actually constant angular. Drive spins, you get what ever data comes.
https://www.oreilly.com/library/view/pc-hardware-in/05960051...
But that probably doesn‘t prevent drives from operating them as CAV, as long as they vary the read/write rate accordingly.
I think Apple even had a marketing term for this, which I unfortunately can't recall.
Or is data stored "closer together" when it's in the inner track?
Furthermore, varying rpm is explicitly mentioned in the headline post.
Also explained here...
http://www.osta.org/technology/pdf/cdr_cdrw.pdf#page=15
In CAV modes, data rate — and laser power, in the case of writing — is a constantly increasing function of the radial position of the read/write head.
[1] Though this fixed velocity — and, by extension, data density — is allowed to vary from disc to disc. Assuming the standard (4.3218 Mbit/s raw) data rate, any velocity between 1.2 m/s and 1.4 m/s is permitted, but must then remain fixed within IIRC, a +/- 0.01 m/s margin of error.