Hacker News Reader

Comment by chrisco255 | Hacker News Reader

Cast iron is not bad at all to clean if you have a chain link steel scrubber (The Lodge sells these, other companies too). Ideally you scrub it when the pan is still warm. If you've let something sit in there that hardens, like cheese, you may have to let it soak in some warm water for a bit and apply elbow grease with the scrubber. You can even fill it with water and set it on the stove to warm the water up a bit to break down anything that's hardened.

Most of the foods I cook are basic meats and veggies so it's usually quite easy to clean for those.

View on HN

I wouldn’t soak a cast iron pan.

Just apply a little heat, then use a bamboo/wood spatula to scrape the stuck food, then rinse (if needed) and wipe clean.

For me, the biggest problem with Cast iron is the weight. I’m a big guy, with physical strength commensurate to my size, and cast iron pans are cumbersome to deal with. I have a 9” pan that I leave on the stove for daily use, but I don’t want to have cast iron cookware exclusively.

>For me, the biggest problem with Cast iron is the weight

Seek out better cast iron cookware. For example, Lodge brand stuff is very heavy and poorly balanced. Compare to a Wagner cast iron pan of similar size made a century ago: it is significantly lighter, and well-balanced. I'm sure there must be modern cast iron cookware that can offer the same experience, but probably not new for $30.

I have problems with my hands and those heavy Lodge pans are annoying (good value though). My old Wagner stuff is no more cumbersome than my nice stainless steel pans, and, for meats at least, is a pleasure to cook with.

Carbon steel has much the same cooking properties as cast iron but is like half the weight. You can get a good pan very cheap if you want to try something more wieldy.

Soaps that don't include detergents are safe for cast iron, too. Many people confuse carbon and crud buildup for 'seasoning'. The seasoning you want is a micrometer-scale carbonized oil on the surface of the steel, and possible some excess carbon buildup to fill in any surface pores. A mild soap won't affect this, at all.

You can definitely damage a pan leaving it wet, so of course make sure to heat it up on the stove after washing and drying to cook off any remnants of water. I'll usually put on a very thin layer of Crisco if I've used soap.

You mean soaps that don't include caustic lye. Just about every dish soap is a detergent and safe for use with cast iron as they are not caustic.

Reply on news.ycombinator.com