Depends on the MOSFET. Most discrete MOSFETs have pretty hefty capacitance at their gate, looking like a short to high-frequency inputs.
> The simplest remedy may be adding a “sink” resistor on the receiving end, connected to the signal’s return path. This is usually paired with a series resistor on the driving side, both to limit peak current and to at least roughly match the specific impedance of the trace.
The simplest remedy would be to use series resistor matched to the trace impedance to prevent the reflection bouncing multiple times, probe at the gate and only add parallel termination resistor if it is actually needed. Because then you need to work around the voltage drop.