Looks very similar to OpenEVSE but he wrote his own code.
Nice clean build. Not sure why the extra work instead of just downloading OpenEVSE.
Looks very similar to OpenEVSE but he wrote his own code.
Nice clean build. Not sure why the extra work instead of just downloading OpenEVSE.
But without some kind of a cost difference, I'd probably stick with something like OpenEVS, which seems to have some level of official certification [0].
I personally regret my decision to not go with them when I got my EVSE this year. I went with an EnelX Juicenet because A) it was on the list of devices my power company would mostly pay for and B) at the time it had API availability to integrate with HomeAssistant. They have since killed that second part, which I would have loved to still have. In the long term, the ~$500 I saved by having my power company reimburse was probably not worth the lack of control I now have.
[0] https://openev.freshdesk.com/support/solutions/articles/6000...
-edit- He does have a total cost, I just missed it: he claims that it was ~£200. I leave it up to the reader if that's enough savings to give up the certification.
When OpenEVSE was new, I built one on perfboard, actually a very compact modular stack of perfboards, one layer per subsystem. Handed it off to my software-savvy friend, and he couldn't get it to pass self-test, despite both of us agreeing that every piece of the circuit appeared correct as per the published schematic.
Eventually he gave up and ordered one of OpenEVSE's commercially-produced boards, and it failed self-test at the exact same place. Apparently there was some unclear documentation and it was supposed to fail there until something else was hooked up, I don't remember the details, but there was nothing wrong with my stack of perf in the first place. Argh.
All of which is to say, it's not hard at all to build one of these things. if you want to lobotomize your closed-crap EVSE and lash an open board to it, do so! I'm pretty sure the JuiceBox is OpenEVSE-based in the first place so it might be as simple as reflashing some firmware.
[0]https://www.theverge.com/23949612/chamberlain-myq-smart-gara...
After reading this article, I had been considering getting one of their most basic kits that doesn't include the cables from the wall to the box or the box to the car (since I have both of those with my current EVSE), but if I can get the same functionality reusing even more of my current one, that would be ideal.
EVSEs also manage DC charging in commercial settings, which bypasses part of the charging hardware in some cars.
My Porsche Taycan is available with multiple chargers from the factory. I have the faster AC charger unit and there is a third unit that is only sold in Europe for Type 2 chargers. The actual charger handles converting AC to DC, which is car specific and why it’s not in the EVSE.
Thank you, I wasn't previously aware of this distinction.
So for simple units that are just "a fancy plug and contactor" (no balancing, limiting, V2G, V1G, etc), what do we call them? I know not to say "EVSE" now, but what should I use? Thanks again.
For level 1 and 2 charging, the charger is in the car. J1772 ports are basically just fancy 110v or 220v AC plugs with some extra signalling.
DC charging tends to happen at much higher power levels, and that equipment is expensive so the AC-DC converter is kept outside of the car. The car itself just has a couple contactors (i.e. high power relays) to connect the charge port directly to the battery, and a microcontroller to tell the charger how much current it can handle at what voltage.
The general public does not know or care about the distinction and in the grand scheme of things, it doesn't matter.
I think "charging station" is the least confusing term for the fixed infrastructure part. If regular people call those "chargers" in non-technical conversation, then I'm not going to lose sleep over it.
And depending on the sophistication of the phone, that converter outside the phone might be doing most of the work.
Well yeah, they are being silly - I don't know why that would be the distinction, even if it did AC-DC conversion it would have no idea what the battery is doing which is the entire point.
>>that converter outside the phone might be doing most of the work.
Maybe, but usually the circuit that controls and monitors the battery is inside the phone, not in the "charger" outside. Even battery chargers for power tools and such work this way - the circuit that controls the battery charging is actually inside the battery pack not in the base, but everyone would call the base a "charger".
The AC power passes straight through the EVSE, unaltered in voltage, current, or waveform. The EVSE may monitor the current to perform logging, and the EVSE is required to monitor the AC imbalance like any other RCD/GFCI does so it can open the contactor if there's a ground fault, but that's it. It's just a smart extension cord, basically.
The charger is in the car, and is the component that actually converts the AC from the grid to DC for the batteries. The charger is what has all the silicon (or these days, probably gallium nitride?), and the inductors and capacitors and stuff to actually transform the power from one form to another. It changes the voltage to match whatever the battery needs at the moment. It controls its own DC output to match the battery's needs, and it limits its own AC input according to the signal from the EVSE so it doesn't trip the upstream breaker.
The charger is also responsible for immediately turning itself off, reducing its input draw to zero, within a few milliseconds of someone pressing the latch of the EVSE connector handle. This indicates they're about to pull it out, and the contacts aren't designed to handle arcing, so the charger is required to drop its current _very_ quickly, allowing the contacts to be separated without creating an arc. That signal (called PP) is produced in the handle itself, there's just a tiny switch underneath the latch. The handle is technically part of the cord which is technically part of the EVSE, but the EVSE has no responsibilities related to the signal, that's all on the charger.
If the SAE hadn't mandated that the EVSE perform RCD functions, it could be replaced by a literal extension cord. Many small DIY EVs do precisely that; the charge cord is the exact same one you'd use to run any appliance. It works just fine. But even small DIY EVs have a real charger too, which converts the AC from the cord to DC for the batteries. The charger plugs into the cord, but the charger is not the cord.
Because you'd need to use a word like "plug" or something, not because of whether it's "charger" specifically.