https://www.asrock.com/mb/AMD/X670E%20Taichi/index.asp#Speci...
Supports DDR5 ECC/non-ECC, un-buffered memory up to 7800+(OC)The Riptide motherboard I use also has ECC listed now. https://pg.asrock.com/mb/AMD/B650E%20PG%20Riptide%20WiFi
Nevertheless that is still excessively high. While in the beginning for DDR5 there were only 80-bit modules, which could claim a +25% higher price, now there are 72-bit modules, like in the previous generations, which can justify at most a +12.5% price increase.
Trying again, I can find some Kingston sticks that are $120 each, so that's about 50% higher. Amazon's search is really bad, by the way. But that's not the "at most" price. And a month ago they were $140 each.
Also the spec sheet says they are 72 bit modules made out of 20 2GB x8 chips? That is baffling. Is 10% of the memory going unused? https://www.kingston.com/datasheets/KSM56E46BD8KM-32HA.pdf
Edit: Micron data sheets suggest that UDIMMs have 2x13 command/address pins and RDIMMs have 2x6, so that's one piece of the puzzle. Apparently UDIMMs can do x64 and x72, and RDIMMs can do x72 and x80.
Because the DDR5 channels must have a width of 32, 36 or 40 bits, with x8 chips one had to use 40-bit channels, even if only 36-bit channels are needed, so indeed 10% of the memory capacity remained unused.
Meanwhile, about a year ago, at least Micron has also introduced x4 chips. There are such ECC UDIMMs, using both x8 and x4 chips, which waste no memory.
On the market there are both modules made only with x8 chips, which do not use a part of the memory, and modules with a combination of x8 and x4 chips, without unused memory.