I’ve notice people seriously overestimate how complicated really simple maintenance/mechanical tasks are generally.
I remember hearing an NPR story about a plumber shortage where the person being interviewed had just paid some thousand dollars to have their PVC drain line repaired. I was shocked. They could have done it themselves with a shovel, a hacksaw, and $5 worth of PVC and glue in maybe 10-25 minutes, well within almost anyone’s capabilities if they had thought to look into it before calling someone.
We really are very rich that we can not think about these things.
I will outline the procedure on my car how I do it so you can see how simple it actually is. No you don't need a lift. Yes you lay down but keep in mind 65 year old mechanics can lay down and its not a big ask for most people in good health to lay down under their car.
> unscrew oil cap at the top of the engine
> get plastic pan to collect oil and slide it under the oil pan
> get 14mm socket wrench and slightly loosen the drain plug
> loosen it the rest of the way by hand, then carefully remove the plug to not drop it into the collection pan (not a big deal if it happens)
> go have lunch
> come back and pour a little new oil down
> go and clean up lunch
> come back and screw the drain plug back on with a new copper washer
> unscrew the filter which i do by hand because i do this myself and don't overtorque like the lube tech
> pour a little oil into new replacement filter and screw back on
> fill with oil
> cap the fill lid
> done
as you can see you screw and unscrew three things. this should fit within the mental model of most people quite easily barring intellectual disability.
(I did get burned on a cross country road trip by some dipshit stripping my oil pan drain hole. I don't know if they just didn't like the far-off plates, or aluminum was an exotic material to them, or what. But that's much less of a worry when you go to the same local place)
As for plumbing you definitely underestimate how much of a pain in the a it is to dig a 4-6’ deep hole to do your own pipes. It can be done in a day or 2 outside of most peoples comfort zone.
I’ve done it, so I’m not underestimating it. I’ve had the exact problem described in the story. And I’m definitely not a plumber.
Maybe car shops are philanthropic where you live, not so much where I live…
I assume part of the reason they offer this service is to incentivize you to buy parts and oil from them, but I imagine there are also regulatory reasons.
So car shops generally won’t take you old oil where I live (although allegedly some do, which I somehow have never heard of), but it appears that most of the gas stations do.
So, my mistake, it appears it’s not so much a pain as I thought, I’ll look into this.
I pay a mechanic to do them because I don't have a lift and disposing of used oil is a pain.
Kids these days are growing up into a world where breaks rarely need changing and oil is something you use in the kitchen, not a car.
Used oil can be disposed of at almost any of the super abundant auto parts stores. You take it in, walk to the back, and dump it in the giant tank.
Are those really your reasons?
Yes. Space is an expensive luxury where I live. Doesn't matter _how cheap_ the ramp(s) and jack(s) and stand(s) are. I'm going to use them ~5 times a year and the rest of the time they're going to be taking up space that more utilized tools/materials/stuff can occupy.
The few $ i spend every ~ 4k miles on oil changes is worth it. Mechanic does it faster than I could because they have power lift and it's second nature to them. While they're under there, they call anything else that's worth it to my attention, too.
My next car will not need oil and then those cheap ramps will _really_ be a waste of space.
Suggests the jack is included only to change a tire at the side of the road, not for maintenance. You were right earlier though, inexpensive ramps for work would be fine.
That is not how you put the front up on stands with one jack and the manual's indicated tire change jack points. You jack up one side, using the "jack point" for changing that front tire on that side, insert one jack stand on that side, then you switch to the other side, jack up the other side using its approved "jack point", and insert the other jack stand on the other side.
Yeah, I know, not very "hacker spirit" of me. But I've got a finite amount of that, and there are other places I want to spend it.
Computers are so good at being programmable that now a days people don't see it as a programmable device, but only as the thing that it is programmed to be. Today there are computers everywhere, but people see a workstatinon, a web server, a gaming rig, a tv, a phone etc, but never the computer is behind all those things.
There has been some thought about students who grew up mostly with touch screens and aren't that great with keyboards and mouse, although I'm not sure how widespread that might be.
Being a consumer, instead of a creator, or knowing how the creation is doen (what goes into it, how it could be maintained).
Optimistically, I'm looking forward to diy food (gardening) among other things being rediscovered if it isn't already being.