Serious question, looking for a serious answer from you: Why?
The wafer-style USB-C connector is mechanically inferior to the size of barrel-style connectors that are typically used for 100+W applications. It's far less resistant to torque and shear, and due to its small size is significantly easier to accidentally dislodge. While accidental disconnection isn't a huge problem for a battery-powered machine, this thing is wall-powered.
Making things worse, unless you want to roll the dice on Amazon not sending you something that might burn your house down due to underspecced conductors and/or connectors, you're going to have to pay a significant fraction of the cost of the PSU for the cable to connect it.
There are also the ergonomic factors to consider. On the overwhelming majority of consumer hardware that's powered with a barrel-style connector, there's only one place where that connector fits. However, on much-to-most of the consumer hardware that's powered with a USB-C connector, there are many plugs that will accept the power supply cable but will refuse to use it to power the hardware. Perhaps one day in the distant future, manufacturers will universally pay the money to make all USB-C-shaped plugs capable of powering the USB-C-connector-powered-hardware they're built in to, but that day is not today.
And sure, you can reasonably retort with "Well, you just keep trying plugs until it works.", as well as "Well, just turn on a light and read the printing on the plugs.". These aren't huge hassles. But I remember that one of the big hassles that the USB-C connector saved us from was "You don't have to try to plug it in three times to get it right.". Going from "Well, it just works, first try!" to "Well, you just have to find the right plug to make it work. Keep trying!" is backwards and a little sad.