Right, micros and temperature sensors are really expensive these days, especially at mass-production volumes.
> But that is just rather silly, given that an analogue solution works better.
tab closed
Right, micros and temperature sensors are really expensive these days, especially at mass-production volumes.
> But that is just rather silly, given that an analogue solution works better.
tab closed
Do you have any reasons those statements bothered you or are you just a pro-digital kind of guy?
You could easily implement thousands of PID controllers sufficient for this application on a $3 microcontroller with a $2 thermistor. Those are sparkfun prices, so 1/2 that would not be unreasonable for a BOM estimate. Sundry connectors and power transistors would cost more, but those will be present in the analog version as well. Temperature proofing is unnecessary - the sparkfun thermistor is rated to 125C and you can trade latency for max temp by moving it away from the heated parts. In this application you can afford to trade truckloads of latency.
Also, this is not a project for 3EEs + 2 technicians, this is a project for 1 bored EE in an afternoon. I suspect calibrating the digital version would be 10x-100x easier on an industrial scale.
I have no idea why or how he thinks the analog version would work better, so I can't really counter-argue.
On a separate note, the price jumps from $16 to $45 going from the analog to digital version, though as far as I can see the only digital-specific additions are the EEs ($7) and PID controller ($10).
As for your separate note, I noticed that inconsistency as well. I never figured it out, although by that point I was ~70% sure the whole analysis was botched so I didn't spend too much time thinking about it.