277 karma · joined June 28, 2019
The downside of SPI (and to some degree 8080) screens is the low refresh rate / missing vsync. There are also screens with an RGB interface, which is then again similar to VGA but digital. But yes, this does not really require an FPGA and an ARM controller with RGB interface is probably much more useful for most applications. (Or even MIPI-DSI, but I have not used it myself so far.)
Still, I have a TFP410 lying around that I wanted to strap to my FPGA at some point to get something better than VGA.
> Still, the timing idea is overall correct as an FPGA-superpower.
And while this is especially true on FPGAs with dedicated hardware like a serdes or gearbox, one can still squeeze out a bit more on most FPGAs with DDR IO or several phase-shifted clocks.
Another a bit more exotic and involved application is a Time to Digital Converter, which can take advantage of the low-level routing inside the FPGA to sample a digital signal with significantly higher precision than the clock (resolutions of 10s of picoseconds down to below 10ps depending on the FPGA).
For work, we mostly use FPGAs for data acquisition systems, low level data processing, high speed data links and so on.
I only know of the evaluation board from Lattice [0] and the OrangeCrab board [1], but there are probably more.
[0]: https://www.latticesemi.com/products/developmentboardsandkit...
A friend did the same to play around with the larger Nvidia GPUs and never ran into any issues, but my almost 20 years old google account is not good enough?
I replaced 2 of the 16GB ECC sticks in my main PC with 32GB ones a while ago and put them in my NAS, will probably do the same with the remaining 2 sticks to max out my RAM.
The address can be changed with the LIDT instruction and operating systems nowadays will just put it wherever, but for backward compatibility it is expected to still be at 0000:0000 (not sure how this is handled nowadays in UEFI, but it should still be possible t o set it up that way).
It is really annoying how every vendor cobbles together a Frankenstein abomination of a kernel with just the right drivers and patches and good luck trying to run anything else. But I also understand that they (except maybe for Google) have no interest or incentive to clean up this mess.
* but I have to admit that the hardware is quite slow
Building new fabs, especially for the advanced nodes, costs billions, takes years, and requires a lot of know how and special equipment. There are only a handful of companies operating and building new fabs.
> TSMC has some extra expertise that others doesn't [...] but together with NVidia, they are the champions, and others are constantly catching up
Not sure what you mean. Nvidia uses TSMC for the manufacturing for the 40 series (and Samsung for the 3000 series) and doesn't have their own fabs.
> Think graphic cards, Radeon(now AMD) has consistently built worse graphic cards, with less R&D, but sold at a cheaper price point and survived throughout the years.
You mean ATI (now AMD)? They got rid of their fabs back in 2009 and put them into GlobalFoundries. They now also mostly use TSMC for their CPUs and GPUs (and profit from the more advances nodes compared to GF) and GF for a few things in larger nodes.
Apple also (just as everyone else you have mentioned) uses TSMC for (most of) their chips and is one of TSMCs largest customers. Intel and Samsung have their own fabs, but also seem to lag behind TSMC.
And on the other hand, planes on long flights are so heavy due to the additional fuel that they can not land early without getting rid of the excess weight first or risk structural damage or worse.This usually means dumping the fuel or burning it off in a holding pattern.
I used to dual-boot for a few games, but nowadays I just don't bother anymore. I check protondb beforehand and most of the games I played just ran without issues. I think the last time I booted Windows for games was for Space Engineers a couple of years ago (which seems to work now, but looks like a pain to set up).
I also have an AM4 ASUS board (is that recent enough?) and earlier this year, ASUS decided to completely remove any mention of this board from their site, as if it never existed. So no bios updates for me I guess? No idea if it is up to date or not or if my CPU is even supported...
> Yes, you would have to buy as many cheap, secondary GPUs as the number of virtual machines that you want to run in parallel.
Except that cheap GPUs are... cheap and not very powerful, so depending on what I want to do I would have to buy a bunch of expensive and powerful GPUs (or go back to rebooting VMs to switch). And there are only so many PCIe slots on my board (2x8 and 1x4, the latter of which is already in use by a non-GPU card). Running them in an x1 slot also doesn't sound like a great idea.
I have tried to run it but gave up in the end after breaking bios updates and not wanting to spend even more money on another fast GPU.
I tried this on my ASRock X370 Taichi a while back. Turns out that there is a bug in older bios versions and the whole thing just freezes when starting the QEMU VM. Then there is an intermediate bios version with which I actually managed to get it working. Unforunately I later upgraded my CPU and had to install a new bios and this again completely breaks the IOMMU groups. Probably spend a few days to get everything running, including downgrading from a non-downgradeable bios version.
And even when it was working it was a pain to use. Want to use the passthrough GPU in Linux? Now I have to dual-boot QEMU VMs or disable the passthrough, reboot, then enable it again, reboot one more...
I really want proper GPU virtualisation...
Compared to e.g. a paper from the ATLAS experiment that looks very concise, it even fits on a single page. I have seen papers where the author list is longer than the paper itself...
And I'm honestly not very fond of how the communities on reddit work. Sure, there is some overlap between the peoples on different subreddits, but there is little 'community' across subreddits and it feels very different to the 'good old' discussion boards that cover a very general topic and then have many more specific subsections. I'm especially missing the more off-topic aspects, which just doesn't fit well with the separation in subreddits.
Now the tricky part is probably to build a neutrino / gravitational wave / whatever source that is intense enough to be useful as a weapon without just evaporating everything in a supernova scale explosion before...