HNHacker News
TopNewBestAskShowJobs

SK6812away

3 karma · joined July 20, 2020

submissionscomments
SK6812away··on Building DIY LED strips for fun
Hey, keep it up. I'd be very embarrassed if any of my blog posts ended up on HN, too.

You'll get there! :)

SK6812away··on Building DIY LED strips for fun
IME, you can use 3.3V logic with 5V WS2812B/SK6812 strips, no trouble.

Each LED reforms the signal before sending it to the next LED in the chain, so voltage dropping over distance shouldn't a huge issue for the logic line unless the strip is very far away from the controller.

And the datasheet almost agrees with my experience; the "high" voltage threshold is listed as 0.7×VDD, and 0.7×5=3.5V. That's a bit over 3.3V, but I haven't had any issues across several projects. Maybe it's because many USB supplies provide a little over 5V to account for droop? Maybe the datasheet is slightly pessimistic? Maybe 0.7 really means 2/3? Whatever the reason, it simplifies the wiring for small displays.

Here's my favorite reference for the single-wire protocol that these LEDs use, since everyone seems to be chiming in with one:

https://wp.josh.com/2014/05/13/ws2812-neopixels-are-not-so-f...