389 karma · joined March 7, 2012
I appreciate what he's doing but the means are questionable - chew up folks for a few years until they're too burnt out to go on, then recruit fresh grads on name and the chance to be a part of something amazing.
If you’re using a rebreather properly and have sufficient bailout, they’re pretty reliable these days. You can switch to OC for sanity breaths if you see an issue and use the draeger ball-gag mouthpiece if you’re concerned about O2 hits.
Turns out a large boulder shifted and cut their guide line (and significantly obstructed the route out) which led to this - there's no amount of planning that would've prevented that.
You described a blowout preventer (https://en.wikipedia.org/wiki/Blowout_preventer) by the way :)
Many cave systems are quite shallow, and while I don't know the details on the one there in Mallorca, by the size of what's described it was probably above the water table even though there likely wasn't a free-air connection to the surface.
Similarly though, there's a trough in the safety numbers where folks between about 100 and 1000 hours seem to be involved in most accidents.
I'm not sure if I'll keep this up if/when I have children, but that's something I'll have to wrestle with when it comes. I have a number of friends who've retired from caving until their kids are teenagers or permanently now that they are fathers & mothers.
Most of the training focuses on systems, skills repetition, and understanding and using redundant systems - folks getting into cave diving typically are already extremely experienced divers who if anything need only some minor skill tweaks - most cave instructors will not take on students who don't already have significant open water technical diving experience (multiple tanks, mixed gas, rebreathers, decompression, wreck, etc).
A running joke is that the lost line drill (where you're placed intentionally off of the guide line and have to find it without a mask/light/visibility) is the most punctual cave task you'll ever do - you have the rest of your life to get it right.
Here's a few good books on it (non-affiliate links):
Caverns Measureless to Man by Sheck Exley (the father of cave diving): https://www.amazon.com/Caverns-Measureless-Man-Sheck-Exley/d...
The Darkness Beckons by Martyn Farr: https://www.amazon.com/Darkness-Beckons-History-Development-...
Beyond the Deep by Bill Stone (the Tony Stark of cave diving): https://www.amazon.com/Beyond-Deep-Deadly-Descent-Treacherou...
The Cenotes of the Riviera Maya by Steve Gerrard (patron saint / mapper of Yucatan caves): https://www.amazon.com/Cenotes-Riviera-Maya-2016/dp/16821340... This is more of a map and explanatory notes but gives great insight into the complexity of it. Currently there are 2 systems that almost all cenotes are part of in the Yucatan, and there's some really interesting work going on trying to link the two. Current work is going on at about 180m depth through a number of rooms at the back of "The Pit", and there are multi-day expeditions going on trying to find the linkage.
In some higher traffic caves these lines are replaced regularly, however with most caves it's an every couple of year type situation and done by volunteer teams.
As a cave is explored & mapped, line is tied on to the end from the explorer's reels - adding multiple knots and failure points. Once there's sufficient traffic or need usually caretakers will go through and attach more resilient line (usually a spectra or dyneema line) and take out the original line, only leaving the exploration markers (name, date, expedition, etc). These teams also find more permanent attachment points or add them (using silt anchors and sometimes bolts) so that the lines aren't secured to cave features wherever possible.
Adding & removing lines on each dive would actually cause more damage to cave features than keeping a permanent or semi-permanent line in place, and there'd be a much higher risk of line movement and entrapment as the connections would be fewer and further between.
Poly pipe is pretty good for being non-porous and difficult for much to grab onto or grow inside - Oil & Gas uses poly lined steel pipes frequently where microbially induced corrosion is an issue (various extremophiles that live in the reservoirs that like to eat iron and shit acid, etc).