HNHacker News
TopNewBestAskShowJobs

gjkood

1,144 karma · joined October 31, 2011

submissionscomments
gjkood··on Ask HN: What entry-level telescope should I choose?
Here's my advice to save money on good astronomy equipment. Go to 'wwww.astromart.com' and pay $15 for a year's membership that gives you access to the classifieds section.

I am a very infrequent hobbyist but have bought quality equipment through astromart. Good quality telescopes have very good resale value if you take care of it.

The best telescope for the beginner is the one they can take out easily into the field and use it often.

A good quality 7x50 binocular is good to start with and then move onto something a little bit more substantive like a 3" refractor or an 8" reflector like a dobsonian or a newtonian with a tripod.

Also install a good piece of astronomy software like Stellarium or similar to virtually navigate your night sky and become familiar with constellations and the bright stars that you can see with the naked eye.

Beware this can become quite an expensive hobby if you fall into the rabbit hole.

gjkood··on Silent Running: The sci-fi that predicted modern crises
The two things that endeared me to this movie:

1. The theme song; Joan Baez's "Rejoice in the sun"

2. Huey, Dewey and Louie, the little Robots that assist Bruce Dern's character Lowell in maintaining the space ship.

I always take the trouble to show my kids Joan Baez songs on YouTube so they don't feel that good music only started with their generation :). Oh what a beautiful voice!

gjkood··on Voyagers Detect an Increase in the Density of Space Outside the Solar System
Thank you for this. Passed through Barstow several times but never knew this gem existed. Added to list of places to visit.

For me personally, I think the deep space probes are the finest examples of man's ingenuity. The use of math and physics to plan and plot something like the journey of the Voyager probes across decades, to actually see it in action and working just as predicted is an amazing thing.

gjkood··on Studio Ghibli releases 400 free-to-use images
For me, watching "Spirited Away"[1] was my mind blowing introduction to beautiful Japanese animation and Hayao Miyazaki/Studio Ghibli in particular.

As a child I used to watch a lot of the Japanese Robot related animations. A precursor to Transformers I guess. I also remember 'Kimba, the White Lion' which later got reincarnated as Disney's Lion King. But nothing held a candle to the beautiful animation of Spirited Away.

[1] https://www.imdb.com/title/tt0245429/?ref_=fn_al_tt_1

gjkood··on Who is the greatest knife steel metallurgist of all time?
Bought one of those Wusthof Classic Block Set with a few knives in it more than 20 years ago. The blades still look like new, the handles have some scratch marks. Use them every week multiple times.

Only care provided was to hand wash them, dry them and put them back in the block. Very rarely attempted sharpening but frequently honed with a steel whenever I felt any dullness while cutting.

Thats about the lowest maintenance I can think of.

Buy decent knives, take care of them and they will last a lifetime and maybe multiple generations.

gjkood··on Seven-year-olds as hackers, and why we should imitate them
Yes, this is a favorite of mine. I had an old wooden plaque with this saying on my wall. Got lost when I moved homes.
gjkood··on Oldest 'nearly complete' HIV genome found in forgotten tissue sample from 1966
If you have time I would recommend two movies that touches deeply upon this topic. They are 'Philadelphia'[1] which garnered a 'Best Actor' Oscar for Tom Hanks and 'And the band played on'[2] starring Mathew Modine.

'Philadelphia' a fictional movie that touches on the social stigma associated with HIV and 'And the band played on' captures the politics of why it was ignored by Reagan and his supporters for so long and the sad politics and scientific infighting in the chase for a cure.

Both are incredible movies.

[1] https://www.imdb.com/title/tt0107818/?ref_=nv_sr_srsg_3

[2] https://www.imdb.com/title/tt0106273/?ref_=fn_al_tt_1

gjkood··on Godot Editor running in a web browser
I guess its all relative.

In the late 80s I was impressed by a full Wordstar compatible text editor for Turbo Pascal which only occupied 25K (including the compiler). Times have indeed changed.

gjkood··on A 125-year-old delivery network that feeds Mumbai
For a nice introduction to the subject of Mumbai Dabawallahs I would strongly recommend watching "The Lunchbox" [1] starring the late Irfan Khan. A great actor tragically taken from us at a relatively young age.

Beautiful movie. Enjoy.

[1] https://www.imdb.com/title/tt2350496/?ref_=nv_sr_srsg_0

gjkood··on Ask HN: How do I learn C properly?
To start with, "The C Programming Langauge", Kernighan & Richie (K & R) [1]. Find the latest edition that you can buy.

I think the primary topic to master in C is pointers. This is where most falter. It takes a few years to "master" (if we ever do). Here I would recommend "Understanding and Using C Pointers", Richard Reese. [2]

If you are interested in networking, any of the classic "TCP/IP Illustrated Vols I/II/III", W. Richard Stevens, [3] contain a ton of C code to implement components of TCP/IP.

If you are interested in Graphics, then "Graphics Gems", Andrew Glassner [4] is a good source.

"An Introduction to GCC", Brian Gough, [5] to understand the tooling and its various bells and whistles.

My learning swimming by jumping into the deep end of the pool experience was realized by learning Windows Programming using the Charles Petzold book and navigating through Microsoft Foundation Classes in the late 80s/early 90s. The state of the art in tooling wasn't that great in those days and I spent months with the book to get things going. This was done after I had built a foundation with K&R and a decent amount of Unix network programming.

I see a lot of the other posts recommend more modern books. But you still need to build your foundation on C and Pointers in particular.

Good luck on your journey.

[1] https://www.amazon.com/Programming-Language-2nd-Brian-Kernig...

[2] https://www.amazon.com/Understanding-Using-Pointers-Techniqu...

[3] https://www.amazon.com/TCP-Illustrated-Protocols-Addison-Wes...

[4] https://www.amazon.com/Graphics-Gems-Andrew-S-Glassner/dp/01...

[5] https://www.amazon.com/Introduction-GCC-GNU-Compilers/dp/095...

gjkood··on PyRobot
I used to coach a FIRST Tech Challenge (FTC) Team for my son's high school. The main Robotics competition for middle/high schools are based on the FTC Pitsco TETRIX, FRC AndyMark, VEX Robotics Platforms.

You can find the majority of hardware and electronics you need for basic robotics from the following sites:

https://www.pitsco.com/

https://www.vexrobotics.com/

https://www.andymark.com/

http://www.revrobotics.com/

https://www.servocity.com/actobotics

The high costs come into play when you have to deal with high precision servos with high torque. The Trossen Robotics site gives you an example of high precision servos and pricing.

https://www.trossenrobotics.com/

You can find cheaper robotics options at the following site

https://www.robotshop.com/

When you run a team you start with a budget in the low Ks and build out the equipment inventory over several years. There is high attrition in many of the electronic parts (Servos, Controllers, Sensors) when you compete.

Building basic robots is not complex. Basic navigation using techniques such as dead reconing, etc are not complicated. What is complex is advanced software techniques for navigation, motion planning, etc which rely on some complex math.

Have Fun!

gjkood··on The Essential Guide to Electronics in Shenzhen (2016) [pdf]
Any building in HQB is an example of "vertical integration". The ground floor sells the finished product, the top floor you can get all the components to make that product with all floors in between you can get some form of sub-assemblies in between the raw components and the finished product.

It will blow your mind if you have never seen something like that before.

The closest I have seen somthing similar before I visited Shenzhen was Sim Lim Square in Singapore which was just one or two buildings in total.

I bought two copies of Bunnie's book before I left and learned some basic Mandarin before my trip there. Knowing numbers will take you a long way to doing some basic price negotiations but using/reading a calculator for price communication is also fine.

gjkood··on CIA Gift Shop
Or as commonly attributed to George Orwell...

"We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm."

gjkood··on Engineering for the Long Haul, the Nasa Way
I was coaching/mentoring my son's high school robotics team for a few years and on many occasions I used the NASA workmanship standards [1] (also mentioned/linked in the article) for learning myself and teaching the kids how to do wire management, making wire terminations, crimping etc.

What a wonderful resource to have at your fingertips.

I feel the standards and attention to minute details go a long way to explain the longevity of the NASA spacecraft.

[1] https://workmanship.nasa.gov/lib/insp/2%20books/frameset.htm...

gjkood··on Ask HN: How to get started developing with FPGA?
Digilent has been making affordable FPGA Development kits using chips from multiple vendors for a long time.

I am sure you will find something suitable there.

https://store.digilentinc.com/fpga-development-boards-kits-f...

gjkood··on Hundreds of skulls reveal massive scale of human sacrifice in Aztec capital
Agreed. Hence my quotes around "new world".

I wish we humans can outgrow the inherent evil in ourselves, but I doubt we ever will.

gjkood··on Ask HN: What are some great books that are relatively unknown in the US?
My favorite collection is the "The Golf Omnibus" aside from all the Bertie Wooster books themselves.
gjkood··on Hundreds of skulls reveal massive scale of human sacrifice in Aztec capital
Watching Mel Gibson's Apocalypto gave me chills.

I don't know if there are any other movies that depict the times so realisticly (atleast from a movie watcher's perspective though not from a historian's one).

The last scene showing Hernan Cortez's ship is the bridge between the old world and the "new world". The start of the decline of the Aztecs.

gjkood··on Ask HN: What are some great books that are relatively unknown in the US?
Some great comics/graphic novels that are relatively unknown in the US

Asterix comics [1]

Tintin comics [2]

Yes, I know Spielberg's Tintin animated movie is well known but I doubt most people in the US have heard of the entire series of Tintin comics.

I couldn't devour these fast enough when I was growing up.

[1] https://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3...

[2] https://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3...

gjkood··on Get out of my building (2009)
Just for context for those who don't know who Steve Blank is, he is the author of two books that I admire the most in my journey starting up my own venture.

The story here gives the origin of one his most critical 'Epiphanies'... "Get out of the building".

"The Four Steps to the Epiphany" [1] and "The Startup Owner's Manual" [2]

[1] https://www.amazon.com/gp/product/0989200507/ref=as_li_tf_tl...

[2] https://www.amazon.com/gp/product/0984999302/ref=as_li_tf_tl...

gjkood··on Particle physics experiments have stopped answering to grand theories
You just forced me to skim the article for that nugget!
gjkood··on Vertical Takeoff and Vertical Landing, Now Available for Model Rockets
Yes, different licences for different impulse classes of rocket motors.

More details can be found on the National Association of Rocketry website (http://www.nar.org).

Level 1[1], Level 2[2] and Level 3[3] certifications.

[1] http://www.nar.org/high-power-rocketry-info/level-1-hpr-cert...

[2] http://www.nar.org/high-power-rocketry-info/level-2-hpr-cert...

[3] http://www.nar.org/high-power-rocketry-info/level-3-certific...

gjkood··on Vertical Takeoff and Vertical Landing, Now Available for Model Rockets
This is at the end of the article.

"The system costs $299, and is only available for sale to residents and citizens of the United States due to ITAR restrictions."

gjkood··on Ask HN: If I Close My Data Centers, What About the People/Jobs Lost?
You obviously have a good heart for asking the question!

I have a feeling that whatever decisions you finally take would take into consideration the wellbeing of your employees.

I would assume that the folks who are doing the legacy stuff have the necessary aptitude to pick up the skills that are needed to automate for the future. Can their existing data center skills be translated into learning about AWS/Azure, VMs, Containerization and the necessary scripting and DSLs around those toolsets?

Obviously there will be reductions in headcount but give them the option to retool for the future. Even if they are not all retained but if you retrain them then they will still have options elsewhere with relevant skillsets.

You are finally running a business after all where revenue and profit are the drivers.

Good luck and I would say that your employees are luckier than those who consider them as mere resources and not people with lives and loved ones to take care of.

gjkood··on The Garden of Earthly Delights by Jheronimus Bosch
Being a total art ignoramous but clearly interested in the technical aspects behind the site, I quickly googled the painting and learned that it was a triptych (had to google that) whose dimensions were 87 in x 153 in.

A few questions to anyone who can shed more light:

1. What would be the likely dimensions of the source image in pixels to reach such a zoomed level of detail?

2. What kind of camera equipment would I need to photograph such an image of similar size? Can I get away with a run of the mill DSLR such as Nikon D3400/D7500 or Canon EOS 80D?

3. What kind of lens is suitable? Macro?

4. What would be the process of photographing such an image? Taking a single high-res image or taking a series of high-res macro images under suitable lighting and stitching them together?

5. What would be the tools to host the image that would allow this kind of interactivity?

I have a project in mind that could make use of the same technology.

gjkood··on Chinese Workers Abandon Silicon Valley for Riches Back Home
I do remember the days when a database in the 'GB' size range was considered a very large database.

But hey, why would you ever need more than 640KB memory?

gjkood··on Chinese Workers Abandon Silicon Valley for Riches Back Home
I am curious what the definition of an 'AI engineer' is.

Is it:

a) someone with an undergraduate/graduate/doctorate degree in CS with specialization in AI/ML?

b) someone with a non-CS degree (Math/EE/CE/Other) who specialized in AI/ML?

c) someone who attended an AI/ML course on Coursera?

d) other?

gjkood··on A unit testing framework for Sinclair ZX Spectrum assembly
My first computer experience was with its under-powered sibling, the ZX81 [1]. Typing in and running silly little BASIC programs was the most exciting thing in those days.

[1] https://en.wikipedia.org/wiki/ZX81

gjkood··on Down the Drain: How the Swachh Bharat Mission Is Heading for Failure
Quick question. How is the issue of human waste processing done in large scale temporary human accommodations such as a military forward operations base or a large scale construction township?

Would it have the necessary sewage handling/treatment facilities built first or are there temporary systems that can handle a sudden surge in the generation of human waste away from any pre-existing sewage treatment facilities?

gjkood··on I tried Haskell for 5 years
Thanks for the link. Great reference. This could keep me occupied for a while.
← PreviousPage 2 of 10Next →