39,314 karma · joined November 27, 2008
While the apparent advent of AGI is indeed really crazy, the point of this article is sort of the opposite.
In the US you have a negative 100% subsidy on solar panels in the form of tariffs, and the planning and permit prices you're talking about are additional similar negative subsidies, not actual costs. They don't exist in Pakistan, and they could be set to zero tomorrow at the stroke of a pen, which is what has happened with balcony solar in several European countries. That's why you're talking about nonsense prices like US$30k for a household system.
At noon on the equinox, Amsterdam gets 80% of the sun that NYC does, and Fairbanks gets 56%. But, at noon on the winter solstice, Amsterdam gets 55% of the sun that NYC does, and Fairbanks gets 7% ofthesun NYC gets. So, in terms of insolation above the atmosphere, Fairbanks is dramatically worse than Amsterdam. If the sine of the sun elevation was the whole story, to survive the winter on solar, you'd need 8× the solar panels in Fairbanks you'd need in Amsterdam, which would need less than 2× New York.
In fact, cloud cover is very important, and I think it narrows the gap a bit.
Aside from pfdietz's good point about regenerators, resistively melting iron with electricity doesn't require any high-temperature exhaust air.
So orality was more central.
> The bitap algorithm for exact string searching was invented by Bálint Dömölki in 1964 and extended by R. K. Shyamasundar in 1977, before being reinvented by Ricardo Baeza-Yates and Gaston Gonnet in 1989 (one chapter of first author's PhD thesis) which also extended it to handle classes of characters, wildcards, and mismatches. In 1991, it was extended by Manber and Wu to handle also insertions and deletions (full fuzzy string searching). This algorithm was later improved by Baeza-Yates and Navarro in 1996.
But you know what all those guys didn't invent? They didn't invent BBSes and XMODEM. Ward did.
Meanwhile, household rooftop and balcony installations continue to proliferate rapidly in Pakistan, Germany, Australia, here in Argentina, etc.
I have no idea why China has such a dismal capacity factor! I suspect they have a shortage of transmission capacity between the sunny places and the populated places. Let me know if you find out.
Heat pumps are probably now economic only in niche scenarios, even at current PV module prices; they cost dramatically more than the solar panels they displace. And they're really only applicable to climate control, not to other applications of heat, such as cement kilns, electric arc furnaces, or baking bread. I do use one to heat my bedroom in winter, but I don't think they are really relevant to the future.
It is true that electric cooking is more efficient, especially when the heat can be produced in close proximity to the food, as in induction stovetops, crockpots, and microwave ovens. I don't know how to size this, but I don't think it's very large.
40% of global shipping by weight is fossil fuels, not just oil (https://billmckibben.substack.com/p/the-happiest-number-ive-...) but that's by weight, not energy consumption. The vast majority of fossil-fuel shipping is shipped by shipping ships, not by railroads, tractor-trailer trucks, stepvans, small boats, or personal cars, and, if I'm understanding https://unstats.un.org/unsd/energystats/pubs/documents/2026p... correctly, only 2.5% of the global total energy supply ("TES", the UN's term for world marketed energy consumption) is the bunker fuel that powers those ships. (I had guessed 3%.)
So, completely eliminating fossil fuel shipping will save about 1% of total energy consumption.
Even in 02016, I don't think US$2M was enough to tape out a silicon prototype of a working high-performance CPU. MPW ("shuttle") programs can give you working prototypes for as low as US$3000, but only in process nodes a decade or more behind the state of the art. (This is fine for analog, but for high-performance digital designs it's generally fatal.) US$30M is a much more plausible budget for the multiple rapid-fire tapeouts you need for anything close to a state-of-the-art process.
They specifically wanted to avoid the kinds of "quirks" that vendors like Intel and ARM used to make people subject to their patents.
They did try to avoid what they saw as the blunders of past designs, like not leaving enough opcode space for compressed instructions, making instructions conditional, leaving out byte and halfword memory access instructions, having a flags register, having a complicated page table structure, having register windows, having delay slots, etc. None of that was innovative. The actual design of the compressed instruction set and the vector instruction set were innovative, but that came later.
The Mill was the opposite extreme.
I think the on-chip bus interconnect and ALU are probably going to have some finite width, though. Above that number of bits in an operation, your instructions will get slower. Maybe that's what you have in mind, and you just want to abstract that away?
Having published it so long ago means that it's excellent prior art for patents others might try to use against Ultorg or Ultorg clones.
Rooftop solar has both economic efficiency disadvantages (generally poorer siting, being dangerous and expensive to install) and advantages (no transmission losses, no added load on transmission and distribution systems, and in some cases elimination of inverters and other power electronics). It isn't clear to me whether it comes out to be overall more or less economically efficient, and I suspect that it probably depends on local circumstances, and especially on whether you can reduce or eliminate inverters.
However, the most persuasive case for rooftop solar is basically political rather than economic: it reduces or eliminates the building's dependency on utility-scale generation, transmission, and distribution. This dependency can bite in the form of unreliability (like California's intentional power outages during the now-yearly summer brushfire season, or the "load shedding" rolling blackouts South Africa had for several months last year), in the form of extortionate energy prices due to monopoly rent extraction (California being the poster child here at the moment, extorting 29.75¢/kWh from resident), or in the form of systemic fragility (currently there are blackouts in Kyiv because Russia is blowing up the power stations, which amplifies the coercive effect of Russian attacks on Ukraine).
I want to say, I greatly appreciate your help in getting these figures right.
It is true that it would be insane to expect the US to lead the transition to abundant renewable energy, but that doesn't mean the transition won't happen. It just means it will leave the US behind. The US's electricity production (though not energy production!) doubled in the 01960s and then stopped growing, and China's electricity production has doubled over the last 10 years and continues to grow rapidly. Worldwide, we should expect cheap solar panels to lower the cost of electrical energy, opening up new uses for it.
So, the other 82% of primary energy consumption could be reduced by about 60%, except for the part that's already used for heating (how much is that?), and by about 75% when it's being burned in the inefficient internal combustion engines commonly used in cars and the like.
Ballparking, this seems like fueling the current economy purely with electricity, and counting "primary energy usage" as the output in the case of solar panels (rather than "the sunlight hitting them" as you advocated elsewhere, which is a defensible convention but not one anyone uses) would cut primary energy usage by about a third.
According to the IEA, we currently have only about 1.5TW/year of manufacturing capacity: https://www.solarplaza.com/resource/13581/article-global-sol...
Hydropower is already scaled nearly to its limits, and wind energy is useful and important, but is dropping in cost much more slowly than solar, and it's tapping a much smaller resource.