m01

Try this: https://support.mozilla.org/en-US/kb/smart-window#w_turn-off...

It'd be more accurate to make claims compared to the smartwatches listed in the study, than claiming it's the most accurate on the market.

> Participants wore an Apple Watch on one wrist, and a comparative wrist-based device on the other, while using a Polar H10 ECG based chest strap as reference. Wrist assignment was randomized such that Apple Watch was worn on the dominant hand approximately 50% of the time. Wrist-based devices studied included Apple Watch Series 12, Garmin Forerunner 970, Google Pixel Watch 4, Huawei Watch 5, Samsung Galaxy Watch 8, and WHOOP 5. Oura Ring 5 was also worn on an index finger, per the manufacturer's stated best practices3

source, via the footnote: https://www.apple.com/HRAccuracy/

For MFA you could consider using USB security tokens, e.g. Yubikeys or other fido2 ones from various vendors.

At least the earlier Fairphones continued to work even if you removed some modules (like the camera & microphone), and all you needed for that was a regular-priced Fairphone, a screwdriver and a few minutes of time. I not sure if it's still the case for the current Fairphone, but I don't see why it should've changed either.

It's becoming harder to find a place to sit down in London (UK), too, especially one without hostile features like bench partitions or spikes.

Restricting the scope to those two problems would remove 1/3 use-cases and around half of the pages required (going by the "The Birth of a Product" section's bullet point list). It's an interesting exercise to think of the absolute simplest way to solve a given problem. As the author had been "itching to build an app for a while", I think solving the problem was not the only goal here - fair enough.

One example: https://www.caricecars.com (via https://news.ycombinator.com/item?id=45823186)

There's also Turris from cz.nic [1]. Technically they use a fork of OpenWRT with some convenience features like auto-updates, although it looks like you can run OpenWRT on (some of their routers?) if you wanted to [2].

[1] https://www.turris.com

[2] https://openwrt.org/toh/turris/turris_omnia

I get that you wanted to make a general point. In case you're still curious about this specific case:

It's been a long time since I last used Mp3tag, so I tried the latest Mp3tag in WINE (seems to work nicely) for comparison. I think the basic operations (editing tags) actually do work similarly: in both you select file(s), edit the tag you want to in the GUI and changes get applied to any selected file(s) when you press save.

Renaming filenames based on tags also works according to that principle in kid3, you select the files you want to change (rename) and then use the `Format (arrow pointing from tag fields to filename field)` to specify what the filename pattern should look like and then use the `Tag 1` or `Tag 2` button to fill the placeholders from the (e.g.) ID3v1/ID3v2 tag, and click save to apply the changes.

In Mp3tag you'd also highlight the files, but unlike other tag editing operations you use the `convert->tag to filename` menu item/button, which pops up a wizard asking for the pattern and confirmation.

I'm guessing coming from Mp3tag you tried to use kid3's `Tools->Apply filename format` option, which I believe ensures the filename doesn't include special characters by doing string replacements (these are configured in the settings under `Files->Filname format`). I was wondering if that was perhaps confusingly named, so I had a look in Mp3tag to see what this functionality was called there, but I couldn't find it. I'm sure it's possible somehow, but it probably involves scripting [1].

I noticed that Mp3tag seems to be able to automatically fetch album art whereas in kid3 you need to get the image yourself. I suspect more advanced functionality (scripting etc) will work differently in the two tools.

[1] https://community.mp3tag.de/t/character-replacement-for-tag-...

Tesla's privacy policy [1] suggests you can (by disabling connectivity all together), although it does break some features:

> Opting out of vehicle data: Connectivity and performance is a core part of all Tesla vehicles and why some customers choose Tesla, allowing for advanced features and an enhanced driving experience. By default, Tesla provides this seamless experience while protecting your privacy. However, if you no longer wish for us to collect vehicle data or any other data from your Tesla vehicle, please contact us to deactivate connectivity. Please note, certain advanced features such as over-the-air updates, remote services, and interactivity with mobile applications and in-car features such as location search, Internet radio, voice commands, and web browser functionality rely on such connectivity. If you choose to opt out of vehicle data collection (with the exception of in-car Data Sharing preferences), we will not be able to know or notify you of issues applicable to your vehicle in real time. This may result in your vehicle suffering from reduced functionality, serious damage, or inoperability.

I don't know if anyone has tried this.

There are other EVs where it's easier, but it's not something typically featured in the main marketing material.

Regarding eCall (emergency) functionality, "Under EU rules you have the right to use a third party service (TPS) eCall system in addition to the standard 112-based one" and "Any TPS eCall system must: [...] allow the owner of the vehicle to choose between the 112-based eCall and the TPS service" - which also means manufacturers can't force you to use "their" TPS that probably has different privacy trade-offs.

[1] https://www.tesla.com/en_gb/legal/privacy

[2] https://europa.eu/youreurope/citizens/travel/security-and-em...

Have you tried kid3 (https://kid3.kde.org)? It has both a GUI and a CLI.

From a quick glance at the feature lists it looks quite comparable.

> It's hard to tell someone to connect to 2601:3c7:4f80:1a01:4d2:3b7a:9c10:6f5e.

If you would like your IPv6 addresses to be more human-friendly, you could use DHCPv6 (in addition to/instead of SLAAC) and end up with addresses like 2001:db8:3c7:4f80::123. Sure, it's 5 groups of e.g. 3-4 hex digits rather than 4 groups of up to 3 digits, but I think it's much easier than your example. You might set your router to use <prefix>::1 and/or fe80::1 (see OpenWRT's ipv6 suffix/ip6ifaceid option).

DNS servers (that you might occasionally have to type into config by hand) tend to have "nice" IPv6 addresses, e.g. Quad9 apparently uses 2620:fe::fe [1].

> But I'm really not interested in maintaining public DNS for the dynamic addresses at home on my LAN.

I think dnsmasq can these days create AAAA records for local machines whose hostnames it learns via e.g. DHCP.

If you have a public server on the internet and your provider gives you a random-looking address using all 128 bits (and no /64 prefix for example) perhaps using (public) DNS is fine.

Opinions my own.

[1] https://quad9.net.

Ironically on Kobo you can buy Enshittification with DRM:

"Download options: EPUB 3 (Adobe DRM)": https://www.kobo.com/gb/en/ebook/enshittification-4

Kobo does sell some other books DRM-free, so perhaps this is some sort of error. You can buy it directly from the publisher without Adobe DRM, there it has a watermark instead.

Another possible compromise might be to use watermarking-based DRM. Amazon doesn't seem to support it, but other e-bookstores do. In any case, thank you for offering the LeanPub option!

It's at least available as a search filter. On the book listing it seems to show "Type: Ebook (DRM-free)". Maybe there's a better way.

Is there any way to see a full list of what's in each pack?

Get the Raspberry Pi 5 with 8GB (or more if you care). Get the RasPiKey [1] for faster storage (compared to SD cards), without needing to get an SSD. Just use the Raspberry Pi OS.

Re: software setup, curriculum etc.. there are so many resources that target the Raspberry Pi that you can choose something that the child finds interesting.

You can do a desktop computer build if/when they outgrow the Raspberry Pi.

[1] https://www.uugear.com/product/raspikey-plug-and-play-emmc-m...

> I can share an anecdote how slow tech adoption is in Korea. It is not exactly about tech in public section but in private companies. I assume public section has slower adoption rate than private ones in general.

I guess it's not all tech, but at least in telecoms I thought they were very quick to adopt new tech? 2nd in the world to commercially deploy 3G W-CDMA, world first LTE-Advanced [1], "first fairly substantial deployments" of 5G [2]. 90% of broadband via fibre (used to be #1 amongst OECD countries for some time, now it's only just #2).

[1] https://en.wikipedia.org/wiki/SK_Telecom#History

[2] https://en.wikipedia.org/wiki/5G#Deployment

[3] https://www.oecd.org/en/topics/sub-issues/broadband-statisti... -> Percentage of fibre connections in total broadband (June 2024) spreadsheet link

Surely you can still pay with plastic cards, at least if the venue advertises accepting the big card issuers?

The latest neobank might require an app, but I'd be surprised if you couldn't find any bank in your country that allows you to spend money without using mobile apps.

Ask if you can order/pay without using the QR code. I'd be surprised if venues didn't have a paper menu as backup.

Can't you do this with most email filtering systems with a rule similar to `.*@example.com` -> trash/bin?

> But one thing that seems unavoidable is that the "section" (the part where you hold the pen) gets messy when you put the cap on it. I wonder why every fountain pen seems to have this design.

FYI, there are fountain pens with a retractable nib that don't have a cap, including for example the:

- Pilot Vanishing Point/Capless/Decimo (there's a cheaper Japanese "Special Alloy" version as well)

- LAMY dialog

- Platinum Curidas

I don't know if they fix your inky fingers issue but if taking the cap on and off is a hassle then these might be worth looking into.

EDIT: formatting

It seems that both RHEL [1] and Ubuntu Pro have docs on FIPS, so it looks like the distribution vendors have thought about this problem, at least for paying customers. Might you be able to sketch out what the problem with FIPS compliance on Linux is?

[1] https://access.redhat.com/compliance/fips [2] https://ubuntu.com/security/fips

I'm curious, do you maybe have an example for each of the "legal services work processing" and "accounting workflows" that LibreOffice can't handle?

Can you upgrade the storage of your XPS laptop?

Maybe check out the Framework laptops? For example the Framework 13's new screen is 2.8k @ 256PPI apparently [1], which has slightly more pixels than the Macbook Air M4[2] (obviously pixels isn't everything), but you can get up to 8TB NVMe storage + an extra storage expansion cards if you're happy to sacrifice ports and up to 96GB RAM. [3]

[1] https://community.frame.work/t/framework-laptop-13-deep-dive...

[2] https://www.apple.com/macbook-air/specs/

[3] https://frame.work/gb/en/products/laptop-diy-13-gen-amd/conf...

EDIT: typo + formatting

Maybe consider a DECT/WiFi cordless phone that can do VoIP?

Something like https://en.avm.de/products/phone/ (I think they're intended to be paired with the same company's router/modem though). Most of the usual VoIP hardware companies have some DECT phones in their lineup that don't look too different from the analog ones.

If you're put off by the design of phones that try to make joining meetings easier, maybe look for the more basic models, like Poly (now HP) VVX 250?

(I haven't used either model personally)

> “I have money and I have a person’s name and address, how do I send money to them?”

Send a cheque?

For 2FA try a Yubikey or similar hardware U2F device.

(opinion my own)

It's being discussed in courts, see e.g. https://www.eurogamer.net/french-court-rules-steam-users-hav....

Arch has it packaged: https://archlinux.org/packages/extra/x86_64/rnote/

They already acquired Aruba in 2015 (https://investors.hpe.com/financial/acquisitions)...