Does anyone happen to know a more in depth tutorial, to create more advanced, maybe moog-like [1] sounds?
686 karma · joined October 15, 2013
Does anyone happen to know a more in depth tutorial, to create more advanced, maybe moog-like [1] sounds?
I am genuinely curious why the warning was ignored. I am hesistant to believe it was through malice or sheer incompetence. Does upper managment get two overblown warnings per week by engineering, so that this critical warning was "drowned by the noise"? Or were there good (at the time!) reasons to focus on other issues first?
This is an overstatement of the available evidence. The link you post says so itself:
> These studies have found no evidence that ultrasound affects mortality around the time of pregnancy or birth, or has any effect on childhood cancers. In randomised-controlled trials there has been ‘weak evidence’ that it may affect whether a child is right or left handed (known as handedness), which the reviewers say may be the result of confounding, rather than actual causation.
I cringe when I read well-meaning but irrelevant warnings like the one you gave. To me, these warnings are somewhere between naysaying and spreading FUD. The NHS wants to make sure that millions of people don't take unnecessary ultrasounds, since a tiny risk, multiplied by millions, equals a few unnecessary deaths/left-handed children. The individual risk of unnecessary ultrasounds, however, is extremely low compared to the usual risks of pregrancy and childbirth.
Many medical devices are unnecessarily expensive (and suprisingly badly designed, from a user-interface standpoint). There are already enough regulatory hurdles in place that prevent disruption of the medical device markets, let us not add to these hurdles by being overly cautious!
Our direction of time is defined by the observation that entropy (or "chaoticness") always increases with time. If you mix orange juice with water, you will not see the result unmix itself again, even though the interactions between the individual molecules are perfectly reversible.
In fact, you can build a toy-universe in your head, where all interactions are time-reversible, and you would still observe that the chaotic-ness increases with time, unless you start with a completely random initial state (in which the chaoticness stays roughly constant). This increase in chaoticness is comletely unsurprising: It's a simple consequence of the fact that there are much, much more "states" in which a system looks chaotic, than states in which it looks ordered. Therefore, a system transitioning from state to state is much more likely to be in one that looks chaotic, and very, very unlikely to ever go back to a state that is non-chaotic.
The real mystery, for me, is: Why was the initial state of our universe so completely non-chaotic? Why did the universe not start out in a state that is essentially equal to the heat-death [1]? The microscopic processes that are not time-reversible might have something to do with this, but it's not clear at all how they can solve this mystery.
[1] https://en.wikipedia.org/wiki/Heat_death_of_the_universe
The "YouTube voice" works nicely at 1.5x speed, and in my experience, most of the fluff becomes tolerable when it's shorter by 33%.
Instead, I propose to use a slider, like:
> "In your estimate, how does the second response program influence the rate of repeat offenses?"
> Underneath, a slider on a one-dimensional axis, with appropriate labels. For example, on the leftmost side: "50% increase in repeat offenses", and on the rightmost side "50% decrease in repeat offenses".
> Clicking the "reveal" button superimposes the measured effect and its errorbar (this is important!) onto the slider.
That way everyone can see if the measured effect is relevant, or if the measurement error is so large that the study might have missed a relevant effect.
The downside of a slider is that the slider range will influence ("prime") the responses. But I doubt that it would influence the direction of the guess, so you could still extract useful information out of the reponses.
I gave up, somewhat frustrated, and then saw this post. Here is my experience:
- The top to bottom timescale is easy to get use to and makes sense, given that you need a wide space just to fit all the keys. I placed my iPad on the piano in horizontal mode and could well imagine an app that scrolls the sheet for me, for time progression. Edit: Sorry, I was so excited about the article, I did not even see that it goes on after the notes, where the author talks about this.
- With the standard sheet music, because decoding was so inefficient, I would first figure out the keys and then try to memorize the finger pattern as quickly as possible, so that I don't have to decode the notes again. With the new notation I got lazy and kept my eyes on the sheet for the whole time, which actually slowed me down. I had to remind myself to memorize more. Just something to get used to, I guess.
- The notation does not give an exact rhythm, which I actually loved. If you've ever heard the song, you quickly figure out what the rhythm is supposed to be. The minimal rhythm notation is great, because it's not in the way of the notes.
I had a lot of fun learning the start of this song, and I would love to see more. I always wanted to learn some Beatles songs, and the sheet music that my mother bought so many years ago was always too complex to be fun. With this notation, songs like that are a lot more approachable. I don't think it makes sense for classical music, where the timing is not as obvious, but for pop and folk songs, or playing along to Studentenlieder ("im schwarzen Walfisch zu Askalon", anyone?), it seems like a great choice.
One minor sugestion to the original author: It would be great if the grey lines that correspond to the black keys would be bolder and darker. I had trouble seeing them, but I don't have the best eyesight...
http://www.alternatehistory.com/discussion/showthread.php?t=...
However, I maintain that the pressure inside the thermos should only be 60atm, since this is the vapor pressure of CO2 at room temperature [1], where the liquid and the gas phase are in equilibrium. This is like the butane in a lighter: Butane evaporates at room temperature, but there is an equilibrium between liquid phase and gaseous phase when the pressure is higher.
Using 60bar and the adiabatic formula, I get 12.5kJ of energy.
[1]: http://en.wikipedia.org/wiki/Carbon_dioxide#Physical_propert...
- Assuming the inside of the thermos is at room temperature (and that there was enough dry ice initially), the pressure should be around 60bar. This is the vapor pressure of carbon dioxide at room temperature [1].
- At 60 bar and with a volume of, say, 1 liter, the energy available for the explosion is roughly 60bar x 1liter = 6kJ [2]. This is a TNT-equivalent [3] of about 1.5g, or about 10-100 firecrackers. Enough to cause injuries, but not enough for structural damage to a balcony [citation needed].
In my personal opinion, the most dangerous thing was handling the thermos. I believe letting the thermos sit on the balcony for a few days and closing doors and curtains (to prevent glas shards flying in) would have been a much safer alternative.
[1] http://en.wikipedia.org/wiki/Carbon_dioxide_data#Vapor_press...
[2] https://www.google.com/search?q=60+bar+*+1+liter&ie=utf-8&oe...
In a nutshell, interval arithmetic is about storing each imprecise number as a lower bound and upper bound. On each calculation, the lower bound is rounded down and the upper bound is rounded up. The existing libraries are well developed, and the performance hit is often surprisingly close to 2.
I wondered why the thermocouple always returned to the same "room temperature" after half an hour or so, even though I and everyone else began transpiring heavily. It took me embarrassingly long to realize that the thermocouple only gives you the temperature difference between the two points of contact (tip and inside multimeter), and the multimeter took half an hour or so to warm up.
LN expands by 700x when it evaporates and warms up to room temperature. This makes thermoses inherently unsafe for storing LN, because they come with lids. Human experience, and the lid itself, through its design, say: Put this lid on top of the thermos! If you get carried away in the heat of the moment, you might give into this instinct and accidentally put the lid on the thermos. Or someone else who was late and missed the safety briefing. Proper lab equipment, by design, does not come with screw-on tops, for exactly this reason. If you are hosting an LN cocktail party, I propose that you hide, throw away, or destroy the lids for the thermoses. A few years ago a German hobby cook lost his right hand due to putting the lid on his thermos: https://translate.google.com/translate?sl=auto&tl=en&js=y&pr...
Don't ever swallow liquid nitrogen. Once you ingest it (which actually is possible) it will rapidly expand by 700x. If you swallow a tablespoong (15ml), you end up with 10 liters (2 gallons) of gas in your stomach, and it will rupture. Occasionally you'll see YouTube videos of people doing this, but they either don't ingest anything, or very small amounts. I would not ever recommend trying this. Here is an example of the feat going wrong - google "LN ingestion" for more: http://www.ncbi.nlm.nih.gov/pubmed/20065833
Don't put things that have been cooled to liquid nitrogen temperature in your mouth. This is more of a personal story: It was the birthday of one of our lab-members, and he had brought some warm beer. We naively decided to chill the bottles with liquid nitrogen. This made most bottles burst and created huge levels of steam, fun, and what we called "beer popcorn": Beer that had frozen into small nuggets by the violently boiling liquid nitrogen. Eventually the birthday-guy decided to try one of the beer nuggets. As he put it on his tongue, it froze to it. He tried to spit it out, but it froze to his cheek as well. He did not manage to rip it out in time and had nasty cold-burns in his mouth. Fortunately, he was not one to easily be bothered by such injuries, so the party did not end at that moment. But, looking back to it now, the feat very obviously was a bad idea.
Don't transport large amounts (more than a few liters) of LN in small enclosed spaces (a car with the windows rolled down, a small basement room). If the container tips and the gas rapidly boils away, it can dilute the oxygen in the room to dangerously low levels. Danger starts below 17% or so.
Small splashes of nitrogen won't hurt your hand, but they can hurt your eye. The cornea of the eye is quite sensitve and (since it has no blood vessels) heals quite poorly. Most people (not all) recommend safety googles.
LN easily soaks through fabrics - also pretty much all of the fancy "cryo"-gloves that you can buy in lab equipment stores. While they look like they might be the right protection for submerging your hands in LN to grab whatever stuff that fell into the dewar - they won't help.
Touching objects that have been cooled with LN can hurt. If the metals conduct heat well (metals, for example), they can hurt you more quickly than you would expect. You can get nasty cold-burns this way. It is good practice to wear protective gloves (although I sometimes leave them off if bulky gloves makes handling the ultracold equipment less safe.)
All in all, have fun playing with LN! But I recommend to start with some simpler experiments(freezing roses and smashing them, ...) first, and then work your way up to food, and then to alcohol. Be paranoid about pressure buildups and prevent them by design of the vessels that hold your LN.
Are there any simulator-games out there? Like:
"Here are available components in your components box, now draw a circuit that lights an LED without distroying it, regardless how the 5V input voltage is connected. Max component count: 4"
Something in the spirit of Euler-project, but with electronics.
The first two editions had quite a few errata, but there is an online page for them:
http://www.oreilly.com/catalog/errata.csp?isbn=9780596153748...
Certainly, there are many functions that do what I need - but in my experience, the "higher" the level of the function is, the smaller the chances that it fullfills my needs.
> Conversely, does other software do better, on average, in 'doing what one wants'? Which software?
Over the years I have come to appreciate Matlab. Like Mathematica, it also has some maddening idiosyncrasies [0] and is mostly closed source, but it let's me inspect its high level functions. For instance, if I am not happy about the errorbar plots, I can execute the command "edit errorbar" to get an idea what I have to change. If the change is complex, Matlab is a decent enough IDE to implement it anyways. In comparison, Mathematica seems like a front-end to the kernel to me. It is not a proper IDE. I heard there is a Mathematica IDE called Wolfram Workbench [1], but it costs extra.
For me, my biggest problem is not about the sofware "doing what one wants", but that it is doing things I don't want. File corruption and sign error bugs are absolutely not ok for software that I base my publications on, and I have not encountered them in the alternatives [2].
Mathematica is a powerful piece of software and has many use cases. Of course it can't be a "eierlegende Wollmilchsau" that is good at everything [3]. But personally (disgruntled customer rambling here) I wonder why Wolfram Research is devoting so much energy into developing all these new, shiny features while the foundation is crumbling.
[0] Try running a Matlab script that has - gasp - a space in its name. It will fail and produce an "undefined function" error message. (Not very helpful to new users.) The newer versions at least warn you if you try to save a script with an illegal name - but they still allow you to run it and produce the non-descript error message.
[1] http://www.wolfram.com/products/workbench/
[2] The alternatives I actually use are Igor Pro, Matlab, and Excel. Excel can easily lead to sign errors because of the unexpected behaviour of the unary minus. It takes precedence over the power operator, so if you evaluate "-1^2", the result is +1. While you can get used to that behaviour, you can easily forget it when you work with references. Say A1 contains 1, then "-A1^2" evaluates to +1. If, like me, you prefer working with named cells and name A1 as x, then "-x^2" also evaluates to +1. I once botched an analysis due to this behaviour. Ironically, this was one of the reasons why I wanted to base my current analysis on Mathematica.
[3] http://commons.wikimedia.org/wiki/File:Wollmilchsau.png?usel...
The high level functions, while nice for demos, never quite do what you need. Want to display data vs. time with errorbars around the data? Sorry, no function for this completely exotic use case, please hack a DateListPlot on top of an ErrorListPlot [1].
The WolframAlpha integration "transparently" interprets code for you in the background. This interpretation can change any day [2] and leaves you guessing why your notebook doesn't run anymore.
The bugs I encountered were severe: One of the output function swallows the "-" sign if the result is between -1 and 0 [3]. Currently I am battling file corruption of notebooks that are saved on network drives and open while the drive is disattached/reattached.
Had it not been for the awesome support by the mathematica. stackexchange.com community, I would have quit Mathematica completely. Now I vowed to use it only for small hacks. And, if I want to impress someone, for demos.
[0] https://www.youtube.com/watch?v=EjCWdsrVcBM
[1] http://mathematica.stackexchange.com/questions/18962
[2] The input
Quantity[1, "Kelvins"]
is interpreted by Mathematica itself and yields an object equivalent to "1 Kelvins". The input Quantity[1, "Kelvin"]
however is interpreted "transparently" by Wolfram Alpha. A few weeks ago it evaluated to "1 KelvinsDifference", but now has changed to "1 Kelvins". Don't get me started on the KelvinsDifference vs. Kelvins thing, which are both represented by the same symbol to maximize your confusion when your unit conversions are failing...On the other hand, I guess that scanning a large amount of emails is the precise thing that allows them to offer robust email-to-event conversion. But I wish that this sort of thing would work locally (on the cellphone or computer in question), not on a remote server somewhere.
[1] http://en.m.wikipedia.org/wiki/Proton-enhanced_nuclear_induc...
In the paper [2], on the bottom of page 4, they give the answer to this discrepancy:
"By considering the structure of PSCs (~500 nm-thick PbI2 coating) and the material loss during the spin-coating process (~89.6%), 21.5 kg of PbI2 enables the fabrication of ~709.0 m2 PSCs."
This seems ridiculous. If you use 21 kg of material for spin coating, 19 kg don't just vanish into thin air. I would imagine that the material that is flung off can be collected in the bottom (or somewhere else). But maybe that is not possible?
If 90% of the material would disappear during spin-coating, then how can the researches claim that they safely recycle lead? They are doing the exact opposite!
[1] https://www.google.com/search?q=21+kg+%2F+(6+g%2F(cm^3))%2F(...
[2] http://pubs.rsc.org/en/Content/ArticleLanding/2014/EE/C4EE00...