You can get kinda close to that with OctoPrint running on a RaspberryPi. You'll still have to slice it manually, but you can upload the gcode and start the print from another browser tab.
Laser powder bed fusion (L-PBF) of polymers was only in its infancy in the late 80s. This was research out of UT Austin that would eventually lead to DTM. Proper L-PBF of metals (fully melted, fully dense parts) didn't come about until the late 90s in the research world. L-PBF of metals wasn't really commercialized until the 2000s.
In any case, this is lightning speed for an industry that still produces something initially designed in the 60s (Boeing 737).
For more insanity, it was initially suggested to be a return to launch site (RTLS) abort test. The mission commander shut that down in a hurry. I've always thought it was interesting that Buran could fly autonomously while the Shuttle couldn't.
That's a good point about scaling. They're not trying to build 50 of them right now, just a handful of prototypes. And AM is particularly well suited to that.
While I'm not convinced on the utility of 3D printing a cylinder (I think they have plans for more complicated lifting body type shapes in the future), it's great to see more players in the game!
As an aside, I'd love to know what alloy they're using. I know NASA had problems with fusion welding 2195 and had to switch to friction stir welding.
That's why I specified an industrial machine. No fab shop is going to use a 20% duty cycle machine. Granted, you can weld just as well with a cheap machine.
Wire and gas costs aren't the issue. It's the cost of the welding machine because only one person can use it at a time. You can buy multiples of these for the cost of one industrial machine.
This is where the most promising applications have shown up (but not necessarily the money). It’s fantastic for things like assembling wiring harnesses for aviation where it can serve as a sort of interactive manual.
This is a huge field in additive manufacturing. One of the most promising solutions is in-situ process monitoring to identify defects that may occur, often using machine learning.
Reading between the lines, it seems like this is intended for high quality steels. Think aerospace, not buildings. Actually in those applications, you don't really want carbon. The strongest steels have virtually no carbon. Hydrogen embrittlement and cracking have nothing to do with this.
Steel is an incredible massive category. For high quality steels (duplex, maraging, PH stainless), you actually don't want much carbon. Since they talk about "aging properties" in the article, I'd imagine they're targeting the nicer stuff. This doesn't seem like a process intended for cheap steel.
Airport scanners are not CT. They will only give you one projection. I would also be willing to bet these CT machines can only scan a very small volume. Typically, they will rotate the sample, not the X-ray source and detector. I’d imagine some of the cost comes from being able to move the source and detector while keeping everything in alignment. (Disclaimer: My experience is secondhand with scanning metals)
It’s the chromium. Cookware usually has nickel too. When a pan is advertised as 18-8, they mean roughly 18%Cr-8%Ni. Basically the same as 304 stainless steel. You have molybdenum additions in something like 316 stainless steel.
It's dirt cheap and incredible versatile. It has many different crystal structures that can give you an incredibly wide range of properties. General purpose mild steel used in buildings. Stainless steel that resists corrosion. Maraging steels used in aerospace.
Also, the high modulus is interesting. Some components are stiffness limited such that you couldn't use aluminum or titanium even if you wanted.