It's a minor matter, but it's a shame you felt the need to remove the image when it's so useful and relevant.
742 karma · joined June 11, 2015
It's a minor matter, but it's a shame you felt the need to remove the image when it's so useful and relevant.
I hackintosh so I'm less well-placed to answer your second point, but I'll try: A Mac is expensive, but you know exactly what you're getting and you know it will work well (recent dongle madness notwithstanding).
Meanwhile, eOS markets itself (previously implicitly and now apparently explicitly) as a potential replacement for OSX. But it's nowhere near. It's an outdated version of Ubuntu with some basic custom apps on top (a calculator, another basic wrapper around webkit, a slightly cleaned up fork of a file browser, etc).
And then you stray to the third party apps, and as always with desktop Linux, they're awful. Everything uses a slightly different toolkit, the UI elements are ugly, UX seems to be devs' lowest priority item, and of course you can't completely interact with industry standard formats (DOCX, PSD). The Intel Mesa driver still tears and/or stutters (actually all drivers do except Nvidia's) so watching videos is an awful experience.
Most of those items above are not fatal by themselves, but together they make for a miserable experience. I used desktop Linux (mainly Ubuntu) for over a year since I needed to do some dev and couldn't run OSX at the time. I won't try again unless there's a revolution in the desktop FOSS world. (Good video drivers, standard well-designed toolkit, UX as a priority, deeper integration of things like WINE.)
I do have some family members who use ancient core2duo laptops and do absolutely everything in Chrome. I pop Ubuntu MATE on their machines so they can avoid malware. I also always keep a live USB stick handy for flexible troubleshooting. As far as I'm concerned, this is basically the limit of usefulness for desktop Linux.
I understand some people value the flexibility above everything else and thrive under desktop Linux. I'm not trying to devalue their views or say that their setup is wrong. Use whatever works for you- but if you haven't gave OSX a serious shot yet, do try it.
If you're determined to avoid other third party drivers, you can be sure to use only natively supported networking and sound devices.
That only leaves the Clover bootloader, and it's certainly true that this hasn't had an audit/is large enough that performing one would be quite a project. However, it's fully open source and receives quite a bit of interest from across the hackintosh community.
Hackintosh users are also rather small in number and mostly technically knowledgeable; there are far larger and easier userbases to target rootkits at.
Therefore, although I understand your concerns, I am not worried at all about the security of my hackintosh.
>Fedora
Desktop Linux (any variety) is in no way comparable to the usability of OS X. I say this as someone who ran desktop Linux exclusively for years.
(I also had no results, though, because I've turned everything off.)
Ahaha.
Really hope I get to work with this engine some time.
A demo that starts working immediately with no input required is a LOT more impressive and impactful than something behind a "try" button.
129.24 MiB is actually really small for a 15min video.
Nope. PCI-E 3 capable cards work perfectly in PCI-E 2 motherboards. In fact, no graphics card currently on the market can significantly benefit from the boost offered by PCI-E 3. This includes Titan Xs in SLI: http://www.anandtech.com/show/7089/geforce-gtx-titan-twoway-...
>Things get a little more complicated with multi-GPU card builds.
Sure, but I would speculate that anyone going that route is an enthusiast who knows what they're getting into and is happy to do the research.
That's fine, nothing wrong with that. You are simply not the target market for an ultra-high-end PC gaming peripheral.
Mini-ITX is easy enough. Micro-ATX is easy as pie. There are very nice cases for both. If you know of a sub-mITX OEM build that has 4690K+980Ti level performance, I'd like to see it.
>compatibility is always frustrating
Not really. A graphics card, for example, has two things to check to verify compatibility: * Will it physically fit in my case? (Check the length) * Is my PSU powerful enough and has the correct connectors?
That's it. Every graphics card has been PCI-E for a decade. If it fits and has power, any card will work in any motherboard.
CPUs are also not too obtuse. If you have an Intel 9-series motherboard, you can install any Haswell or Broadwell chip. This kind of stuff can easily be googled. It's no harder than getting the correct speakers for your home theatre.
People who play video games on them do.
>Most people have just laptops/MacBook.
Not people who play video games.
> I guess nobody would want to bring back those beasts in their living rooms again just to use Oculus Rift.
If they like to play PC games in their living room, they already have a PC there. If they don't, this won't change that.
>"They should have really considered full device experience where you get everything you need and hardware is exactly designed to give optimal Oculus experience."
So... sell the Oculus together with a gaming PC? What's the difference between that and getting your own separately?
>World has long moved on from knowing which graphic card you need for your PC.
Except for those people who play video games on their PC. Those people generally do know what video card they have.
>I really hope this has good enough performance on typical Lenovo/MBP at least.
It will not. A powerful desktop gaming computer is absolutely required for acceptable VR performance in any interesting game.
Buying a prebuild is a bad idea. Apart from being overpriced, they often have strange custom motherboards and cases which make upgrades complicated.
There's always those places where you select the parts and they assemble the machine for you, but I can't recommend them. I bought a machine from Cyberpower UK a few years ago and had nothing but problems with it.
Just grab the parts from Amazon and assemble them. It isn't difficult, you're simply buying it in 7 parts and plugging them together. That way you'll know it's been done correctly, all the parts are standard, and you didn't pay over the odds.
Anyway, your question was for a hard price. I would budget $900 USD for all the parts (including 4690K CPU and GTX970 graphics crad). For a really high end setup for Rift (980Ti), the next step up would be about $1200.