For something critical like landing gear, or say car suspension components, I would highly doubt the use of 3D printed parts, at least in the near term with current production methods. Right now, most parts like this will be forged rather than cast, because there is a higher likelyhood of defects and generally lower strength in cast parts.
The answer is 'it depends'. There are a variety of processes and materials that are called 3D printing. For plastic fused deposition modeling (like the Makerbot), objects can be comparable to say, injection molded parts, which is a more common plastic production method. For metal, selective laser sintering is the most common method, and the parts it produces have different (and probably inferior in most cases) properties than cast/forged/machined parts. There's way too much variety on either side of the coin to say which is more fragile.
Consumer level 3D printing fits the description. The type of plastic fused deposition modeling machines (Makerbot, etc) that are common now all largely hail back to 2-3 open source designs, which they then tweaked and improved on. Hobbyists are still pushing a lot of the game forward with better software and interfaces, as well as ideas for improvements like heated build beds, etc. Knowledge is often shared on web forums and blogs.
It makes some sense. If there are bitcoin wallet apps, there will be attacks that try to steal the bitcoins in the wallet. It increases the incentive to find ways to do this.
I uninstalled the app and put a bookmark to the mobile site on my homescreen instead (like the old days before app stores). It's slightly slower, but on a Nexus 4, it's still fast enough I don't mind. They've improved the mobile interface since the early iPhone days.
No, I got a prepaid SIM in Germany by walking into a shop and plunking down 10 Euros. You can buy traveler SIMs that work with all sorts of carriers abroad, but it will be more expensive. If you can wait till you get there, it's not a big hassle.
Interesting project. Nothing that can't be done without a 3D printer though. Motherjones had an article[0] where the author built his own rifle using a similar method, without the fancy Makerbot.
Also, his point about 3D printers being the 1980s personal computers is off. They're a lot closer to the desktop home paper printers that came out in the 80s. Yes, they let you do something you couldn't do beforehand, but at much higher cost, much lower quality, and much slower than the processes used by industry. Just because I have a laser printer doesn't mean I should print copies of my own book to sell. Flyers for a party? Yes. 3D printers are the same. Print a common household item I'd buy at Walmart? Unlikely. Print a cover for the bottom of my old bike shifter that I can't find online? Yes.
Then I feel like there's a good chance I would just do the virtualization myself. Yes, it can be a pain to set up, but my experience is that they shouldn't need a lot of attention once they are. The hard part for me isn't the provisioning of virtual servers, it's setting up those servers to do what I need them to-whether that's DNS, LDAP, web server, etc. From the page I can't tell if you take care of that, or if this is similar to a web interface for virt-manager.
Of course not, and neither is Pierre, I'm guessing, which is why I assume they're bankrolling others to do the writing. Paul's 'twitter fight me' attitude is a turn off, but at least he very rarely writes anything.
You may want to check http://www.nsfwcorp.com if you haven't already. Paul Carr of old techcrunch fame is the editor, and the writers include a lot of the old eXile staff, along with others. They don't cover all topics, but they definitely write some interesting articles. I've been subscribing for about a year.
Was it ever known if that was a marketing stunt for Zynga/Words with Friends? The articles I read about the incident pointed out the app specifically, which lead to some speculation.
This is what I've always kind of wondered about when reading his books. I think he has interesting ideas, but I have an extremely hard time following the math he uses to back it up. I can't help by think that it may be a put on to confuse and convince readers like myself. At least he puts his stuff out there. Reminds me a bit of Stephen Wolfram.
When I was working there 5ish years ago the government claimed the whole country had fiber connections, but in reality they had just terminated the fiber connection at each village post office and left actually connecting the last mile up to private companies or cities. Which meant it wasn't available outside the densely populated center of the capital.
Enkhmunkh, the principal, was also the main driver behind bringing the OLPC project to a few of the schools in Mongolia. He also pretty much singlehandedly did the localization for the largest project on it, eToys. He's definitely contributed heavily to bringing higher IT education to Mongolia.
I've thought of putting together a "Netflix for tools" where you order a tool, it gets sent to you with a returnable box and label and you send it back when you're done. A drill is a bad example though. I wouldn't stock commodity tools like drills and saws, it'd be things you're going to have to order online anyway, like tools made specifically for one car.
A good example that I could use right now is a BMW airbag reset tool. I stupidly disconnected an airbag when replacing my window regulator. Now I need a very basic, $20 on eBay, electronic tool to reset the system and get rid of the warning light. I'd pay $10 to have it by the weekend when I'll do the work, and it could be used many, many times over. Every German car I've ever owned had similar electrical and mechanical specialty tools I've had to buy and can't use when I get a new car.
This is the most correct reply in all the comment section. I work in operatioa consulting for warehouses and previously worked for an automation company. Very, very few companies are willing to pay more for automation. A lot of times, it just doesn't make sense. Even if there will be a projected return on investment in a few years its a hard sell.
Those aren't facts. That is all speculation from 2 years ago. There is one fact in that article, the fact that there are now 19,000 armed security contractors. This number is much, much lower than the amount of troops in the country. There are a lot of contractors, but those are contract workers, not PMC employees. This is a huge difference than the point you're trying to make. Laundry workers and cooks don't wage war for the government.
Tinder requires sign in with FB but still seems awfully popular. They make sure to make it clear before and after sign up that they'll never spam your wall, which is very important. Few young people are willing to admit that they do online dating, there's still quite a stigma attached.