https://lore.kernel.org/lkml/20201104014915.45tbmnrqvccbrd2k...
Might be copy/paste from another driver or they will implement it later.
1,273 karma · joined October 10, 2013
https://lore.kernel.org/lkml/20201104014915.45tbmnrqvccbrd2k...
Might be copy/paste from another driver or they will implement it later.
It depends on the hardware, for example, mine D-Link DIR-320 (A) has 32MB of RAM and 4MB of ROM (3801599 bytes, to be precise). It's not enough to fit last kernel (IIRC 4.8 for OpenWRT) even without GUI, I had compile it with some hacks.
Edit. It has 256MB of RAM, 128MB of ROM. There is no excuse for this.
Last time I've checked, it could just install packages and some other stuff, which is the smallest of the problems.
And something about Java dependency.
It's HTTPS cert is from RT[1]. Which is 100% russian propaganda. How came you think it's CIA controlled?
2.) Boot is only possible from microSD card. USB is not supported.
3.) Build BareBox with https://www.barebox.org/doc/latest/boards/rockchip.html
Use `rk-splitboot` to split FlashData from the original boot loader, other option doesn't work. Build it, it will create barebox-radxa-rock.img. It's .img, not the .bin.
Write an SD card as in the instruction.
4.) Follow these instructions, but use the generic image.
https://archlinuxarm.org/platforms/armv7/amlogic/odroid-c1
http://os.archlinuxarm.org/os/ArchLinuxARM-armv7-latest.tar....
5.) Build kernel as in this tutorial, ignore the `dts` stuff. The `dts` comes with the kernel sources.
https://wiki.radxa.com/Rock/Linux_Mainline
https://github.com/torvalds/linux/blob/master/arch/arm/boot/...
6.) Copy the zImage, rk3188-radxarock.dts to the /boot and plug in the UART.
7.) sudo picocom /dev/ttyUSB1 -b 115200 -e w
8.) Boot in the bootloader and execute the following commands:
global.bootm.appendroot=true
global.bootm.image=/mnt/mshc1.0/boot/zImage
global.bootm.oftree=/mnt/mshc1.0/boot/dtbs/rk3188-radxarock.dtb
bootm
9.) If it boots, you can make it permanent by following the BareBox docs.
I wish luck to everyone buying these things. You'll need it to run any modern distro in a few years.
What's this? And why is this on the front page?
https://www.dell.com/learn/ap/en/apdhs1/videos~en/documents~...
1: https://github.com/qmk/qmk_firmware/tree/master/keyboards/xb...
Seriously???
> Flutter support for Windows desktop is now in alpha (along with macOS and Linux support)! - https://flutter.dev/
It just started to have some kind of desktop support.
https://miro.medium.com/max/1400/1*GqNHPZ1DErlPPvciO21s9Q.jp...
It worked great for Limbo, Inside and I loved those. Just different tastes.
The biggest advantage of RaspPi is the Linux support. Install and play.
Atom? Only recently it started to run without hopelessly freezing and a whole lot of patches on top of mainline kernel.