63 karma · joined January 7, 2024
There's a common phrase "putting that aside for now" which lets you explore other avenues in spite of contradictions
I suggest you look into reflowing the security chip. Chances are that it's a solder failure, rather than something more difficult like electromigration or something inside the chip.
Now that things are going back to normal, these news sites are crying about lost revenue (that they probably took from someone else in the first place).
>16.Link Width Negotiation in the Presence of Bad Lanes
>In an effort to maximize the link width when one or more lanes of a multi-lane link are not functioning correctly (i.e., reliable communication of training sets across the lane is not possible), PES64H16G2 down-stream switch ports automatically attempt a lane reversed configuration when doing so has the potential to enhance the achievable link width.For example, if lane 1 of a x4 link is not operating correctly, the device's downstream switch port attached to the link attempts a lane reversed configuration to form a x2 link using lanes 2 and 3 (Figure 7.4(d)). If the link partner accepts the lane reversed configuration, the optimal x2 link will be formed using lanes2 and 3. If the link partner does not accept the lane reversed configuration, but instead requests a lane configuration supported by the PES64H16G2 (e.g., x1 link using lane 0), the device accepts the configuration and forms the reduced width link. Otherwise, if the lane numbering agreement fails, the device automatically re-trains the link from the Detect state. During this re-training, the PES64H16G2 port does not re-attempt a lane reversed configuration, but rather tries to form the link without reversing the lanes. As a result, a x1 link is formed using lane 0 (Figure 7.4 (e)).
My guess is it's likely a bad BGA solder ball on Lane1, or possibly ESD damage if you took the SSD out and molested it or rubbed it on a cat right before it broke. Does it indicate it's using reversed lanes?
The comment about NPNs and PNPs is garbage, but there is a design fault with the board - it shouldn't allow HDMI power to flow backwards into the motherboard when the motherboard shuts off. That would likely cause a power rail sequencing issue on the board or SSD, leading to latch-up of various ICs, and non-detection on the SSD on the flowing bootup
I was thinking that the hair is the main reason why their rocket companies are successful or not.
hint: money can't buy time. but it can save them time. So approach from that angle.
9 hours isn’t too bad though. if you keep the door closed the whole time you’ll probably survive
We do know why they don’t get taller - past a certain height the trees can no longer draw water and nutrients up to the top. Foggy conditions can help the physics/chemistry limits, up to a point.