HNHacker News
TopNewBestAskShowJobs

theincredulousk

446 karma · joined July 22, 2016

submissionscomments
theincredulousk··on More on housing price inflation (2021)
Well that is exactly what happened last time it imploded - private equity sitting on loads of cash waiting for an opportunity got one. They were buying houses like they came in 24-packs from Costco.

I'm not sure what the "split" among institutional investors is, but afaik most of them want the houses to rent them and create a revenue stream, not flip them for a one-time profit. So inflation doesn't really help them either; e.g. it means they pay more taxes, and requires more upfront capital for the same revenue stream unless the rent they can charge increases in lock-step % (which maybe it does). The fact that the underlying asset appreciates in value is more than just gravy, but don't think it's the point for them. I think they are doing it because it is almost an obvious investment from a risk-return profile compared to other options.

theincredulousk··on Bugs are evolving to eat plastic
Every time I see one of these articles, I can't help but think of some bacteria evolving or escaping a lab that works a bit too well and ends up destroying the modern world
theincredulousk··on U.S. telecoms are going to start physically removing Huawei gear
The way the last administration rolled this out was certainly with a political narrative, but my guess is it originated with people that weren't thinking at all about politics.

The simple story is that core infrastructure is of strategic national importance, and an elevated risk that infrastructure is compromised can never be worth whatever the benefits are of using a particular supplier's equipment. There is no practical way to 100% ensure that every piece of software, and every chip, in every piece of equipment is clean. Chips are especially scary (the push to have domestic chip fab by the US and other countries is about more than just supply chain).

This is true when it comes from what are considered trustworthy suppliers as well, but you're dealing with probabilities. I think that regardless of whether this move fits into a political narrative about China, or "economic warfare", the practical basis is that for some types of equipment, the risk is just too large and the ability to mitigate too limited, in general.

Unfortunately this was figured out with Huawei/ZTE after the fact, but tbh I don't think the specific company matters at all, it just happened to be they were in this business at the time & based in the wrong country.

theincredulousk··on Samsung Is the Latest SSD Manufacturer Caught Cheating Its Customers
Great the new PC I just built has the "BLU" version.

I've always bought Samsung drives without even comparing.

Edit: OP article says BLU is the new "inferior one", while Tom's hardware says BLU is the old one. According to above comment with The Facts™ it's fine either way.

Jebaited again.

theincredulousk··on US recovers millions in cryptocurrency paid to Colonial Pipeline hackers
Still curious how they specifically recovered the bitcoin. Was it transferred to an exchange? Grabbed when they tried to convert it to fiat? Physically recovered a cold wallet?
theincredulousk··on I've walked away from software development
what the actual fuck
theincredulousk··on AirPods Max
How many products does Apple have to release before people stop trying to say It WiLl FaIl YoU CaN GeT SoMeThInG ChEaPer ThAtS BeTtEr. It is exhausting.

For this round in particular, Apple is not competing against the Grados and Beyerdynamics of the world, they are competing against the Bose QCs and Surface Headphones of the world, particularly those with integrated mics. The vast majority of people buying these ~$300 headphones for daily general use/work/travel can afford ~$500 headphones as well, if they want them. So true to Apple, they do not reduce their addressable market with increased cost, but rather turn themselves into a status symbol among the consumers in their targeted market, due to the increased cost, not in-spite of it.

The headphones will sound at least as good as the direct competition because it's not that hard to do among this class of headphones. Give them some common-sense credit. The build quality is already better from pictures, compared to all-plastic which dominates the market. The user experience will be better with Apple products than pure Bluetooth, as everyone knows.

I'm not even going to touch the audiophile discussion. I'm an "audio person" as well, but again, exhausting discussion. Nobody knowledgeable about audio would use anything with noise cancelling DSP to achieve peerless audio quality. Nobody would use a tiny integrated amplifier and expect it to perform like a full-size discrete amp and wired headphones.

Just like I wouldn't expect my Bose QC headset to compete on sound quality with my Sennheiser IE8s, I do not expect my IE8s to work as a headset or reduce ambient noise while selectively allowing voices though. It is pointless to bring up these comparisons, especially in the context of "sound quality units per dollar".

theincredulousk··on AirPods Max
They're not going to fail, unless you have an insanely high bar for success, and they're not going to sound like shit either. Apple wouldn't just accidentally release a terrible sounding headphone product without having people familiar with headphones listen to it.

The arguments floating around here are pointless. Will you be able to get better sounding (particularly wired) headphones for less money? yes. Just like you can get a higher performance laptop for less money than a macbook, and just like you can buy a discrete graphics card that performs better than integrated graphics (analogy to wireless w/integrated DSP and amplifier, vs. discrete)

Is the point here to have the best sounding headphones? no. There are for daily/practical use cases and pleasantly usable performance for dedicated listening and entertainment. They are primarily headphones for "routine use"/work, e.g. when your listening to music + doing some task, then taking a phone-call or joining a meeting. The same use cases people currently have noise cancelling headphones with built-in or inline mics.

For example, Bose QCs are very popular for that use case, and cost $300+. I use them for daily work and travel, and I'm an "audio person", with completely different setups (plural) for audio quality use cases, well aware that the Bose QCs are not "$300 class" headphones quality wise.

The Apples are more expensive than the QCs, but even from pictures and build materials immediately crush the QCs in build quality. My guess is that they will also beat them in sound quality. Yes they're more expensive, but tbh for the target use case, it is not difficult to justify cost for something you use 8h a day. Of course anything expensive is not in everyone's budget, but considering the target market, people talking about $200-less headphones are not priced out of the headphones, they're just trying to save money.

So, true to Apple, the increased cost doesn't really hurt their addressable market, and instead positions them a status symbol where it is actually important that they cost more than the competition. Yep.

theincredulousk··on AirPods Max
ehhh I'd say mostly solved. The problem of turning a recording into a perfect sound-wave replication is actually not easy, because the physical world is annoying with heat and friction and and physics.

I'd say 24/96 is comfortably the "end game solved problem" quality for source recordings though, not CD. Even if it is just for the baseline safety margin that it is easier to implement perfect filters with no transition bands anywhere near the audible frequencies, and that additional bit precision has no downside unless you get into accuracy problems with noise on the recording side.

From the speaker point of view, I think IEMs are the closest to being "solved", since the tiny drivers minimize the physics issues with larger drivers, they are probably closest to pure reproduction. For full-size speakers etc., pure reproduction can be accomplished for certain frequency ranges by individual drivers, but over the full range it is not so "solved", e.g. with bass there is often a physics issue with the kinetics of moving a large driver cone in perfect phase-sync with the relatively tiny and light tweeter.

I've actually been wondering if speaker cones are a possible application for graphene.

theincredulousk··on AirPods Max
the commonality between the phenomenons of audio and wine etc. is that they start on a foundation of objectivity and end in subjectivity and cognitive bias. Hearing and taste are two things that are literally unique (almost impossibly equivalent, probability wise) for every single person.

As you go towards the top end of these things, the delusion creeps in, which is that the objectivity extends from the foundation to the roof, so to speak. The fact of the matter is that it was gone somewhere in the middle, e.g. why "trained listeners" cannot distinguish between a coat hanger and $1,000 cable, and while "wine experts" will often pick a $15 grocery store bottle over a $300 bottle in a blind taste test. And they will reverse their answers if told the price ahead of time.

These same concepts exist in other product categories, but I don't know of any better examples than audio and wine.

theincredulousk··on AirPods Max
Spotify HQ mode is not a bad digital source. Do you mean that's all (these) people think is required to get high quality playback?
theincredulousk··on Qt 6.0
of course they don't advertise the per-device royalty for embedded - do you (or anyone else here) have an idea what it costs?
theincredulousk··on Internet sleuths take down the SSC Tuatara's 316-MPH speed record
yes, I was referring to theoretical, mechanically limited speed.

It's not like the tires can expand in diameter 200% though. I'm sure that Michelin has parameterized tables for the tire's mechanical behavior that they are confident about by now. They aren't exactly new to tire engineering...

theincredulousk··on Internet sleuths take down the SSC Tuatara's 316-MPH speed record
you could use a maximum value from a parameterized table that I'm sure Michelin has for their top of the line super-car class tire.
theincredulousk··on Internet sleuths take down the SSC Tuatara's 316-MPH speed record
Sorry maybe I wasn't clear - it is a mechanical system with gear ratios directly coupled from the wheel to the engine. The maximum RPM of the engine, propagated through the lowest gear ratio, gives a hard limit regardless of the "real world" variables like wind resistance and friction.

The point was really if the mechanical system can only "turn" to a maximum theoretical speed of e.g. 300mph, then they clearly and obviously didn't exceed it, no matter what, unless the car transforms into an airplane at some point.

theincredulousk··on Internet sleuths take down the SSC Tuatara's 316-MPH speed record
I mean regardless of measurement, the gearbox ratios, engine RPM, and wheel/tire size plainly dictate maximum possible speed.

Why even use GPS for this, as opposed to a known distance and a clock, or an on-site laser (or whatever electromagnetic wave) based system? Seems like using satellites is unnecessarily complex and error prone(esp. civilian GPS).

theincredulousk··on Autodesk Fusion 360 becomes almost useless for hobbyists
Yes, cloud bullshit, which is currently running the world based on the size and scale of the cloud providers.

More users = more feature demand = more bugs = more use cases = larger development team. Engineering is only a fixed cost if you’re naive or an economics major studying for an exam.

theincredulousk··on Red Dead Redemption 2 DRM still has not been cracked (316 days)
Worked with Arxan's technology for a bit. Not surprised it is getting to the point where cracker's don't have the time to break it.

Embracing the point that everything can be broken eventually, the focus becomes just making it take a long time, such that it is not economical, or simply too time consuming "for fun". Arxan's toolkit includes peppering custom checks everywhere in the code, including mechanisms so these checks don't have the same signature and can't be searched for easily once one is found. Further, there are "silent ones", which most of the time don't do anything, but at some point will activate. This makes it so you can think you've broken the protection, and then e.g. one hour into playing the game it randomly seg-faults (crashes with an error indistinguishable from a normal bug, through deliberate memory corruption), or flags your hardware as using a cracked version and blacklists it. Imagine trying to figure out if memory corruption was on purpose or a normal bug when the corruption happened 1,000,000,000 instructions ago by a section of code that is completely innocuous and just had an off-by-1 error introduced via some index calculation. Now imagine there are 500,000 of these little silent/time-delay traps sprinkled all over the code.

In that way it can be nearly impossible to know if you've fully cracked the game. I mean you can really take the long-con with these things, and let it run for weeks, or even just never notify the user and hit them with a blacklist. Imagine playing a game for 100 hours and then out of nowhere having your progress wiped - pretty harsh lesson if you were invested in it.

Then there is the binary + in-memory encryption, and customization of protection for every install. This was one of the holy grails as I understood it - you could make the software such that the protection system is completely custom for every install of the software, which makes binary patching useless. This would be difficult when distributing the software on discs, but, and this is a key point, trivial these days where games are downloaded. It is easy to custom generate binaries for everyone. This can do things like use a custom key based on your HWID that is literally necessary to decrypt portions of the game code. There is no way around having the correct key for your hardware to literally decrypt and run the code, which through other techniques can be made custom and further checked for authenticity, making it impossible to simply get the decrypted code and patch it in to other installs. Related techniques can be used to determine if you're running a binary that was decrypted on a different machine, and that is before getting into code that is custom-encrypted and decrypted in-memory at runtime based on your current HWID. You're probably thinking you can reason your way around this, but trust me, it has all been thought of before. The closest you could probably come is forcing cracked clients to all run in some kind of identical virtual machine, which is going to be shit for playing a AAA game even if it worked and no protections were able to figure out they were running in a virtual machine, which they can.

The list goes on for this tech, and while no single tech is super effective, when they are all put together, it adds up to a knot that very few people will have the motivation or monetary incentive to sort out, or even ability to in a relevant amount of time after the games release. By the time they figure it the next update could be released, and all that is left is to look back in misery at the time of their life they wasted cracking an old version of a game.

theincredulousk··on Autodesk Fusion 360 becomes almost useless for hobbyists
Yes there is plenty of entitlement in software, mostly from folks who have never run a software business. Queue video-game enthusiasts that think the $60 price of the game somehow facilitates providing content updates, bug fixes, and hosting multiplayer servers until the heat death of the universe.

There is significantly distorted public perception of the true costs of software. The hidden subsidies of advertising monetization and data collection have done an excellent job of this. In Autodesk's case, it was enterprise customers paying tens and hundreds of thousands for license seats, so that private parties could use it for free.

The alternative for autodesk may be to show Ads in the software, or collect data about what you're designing for ad profiles. I'm sure people would love that as an alternative.

theincredulousk··on Autodesk Fusion 360 becomes almost useless for hobbyists
I think you meant "marginal cost", and in software it mostly comes from the cost of engineers and infrastructure that maintain, create, and deliver the software. Nowadays that includes bandwidth, storage, and compute for any cloud component. Software is only zero marginal cost if you create it, release it, and never touch it again.
theincredulousk··on Autodesk Fusion 360 becomes almost useless for hobbyists
(disclaimer: I have only used this software for rock-bottom basic 3D printing)

It seems to me the deeper features make for highly sophisticated and capable (read:valuable) engineering software. At the risk of getting pitchforked, is $25 a month ($300/yr) for an "advanced hobbyist" not ...reasonable? I mean an average cell-phone bill is 4x that.

Of course it is always annoying to get into a subscription model when you only use something infrequently - can you activate it 1 month at a time? Otherwise, if someone is using it often, then 25 bucks a month seems to me a more-or-less a fair value, in the context of status-quo capitalism.

theincredulousk··on Automotive Grade Linux
they didn't kill off QNX... It is alive and well as a stand-alone company and still used in many, many automotive applications
theincredulousk··on Solving the chaotic three-body problem using deep neural networks (2019)
Isn't it even in theory not possible for any algorithm (be it an ANN or otherwise) provide a solution to an infinitely variable chaotic problem based on solutions from a less-than-infinite set of other chaotic problems?

Isn't essentially they key concept of chaotic problems that they aren't predictable, so there is no real "pattern" to train on so to speak?

theincredulousk··on Solving the chaotic three-body problem using deep neural networks (2019)
Tell us how you really feel scott
theincredulousk··on Stripe Is Holding 25% of Our Funds, Indefinitely
Yes this is risk management, and tbh holding 25% for 28 days isn’t all that unreasonable.

If your business’ finances can’t adjust for what amounts to a 1-month billing cycle for 25% of your revenue, look inward.

theincredulousk··on Megadesk
I was actually hoping this was going to be some WFH setup where someone had pushed multiple desks together like that episode of The Office
theincredulousk··on 20yo Robinhood Customer Commits Suicide After Seeing $730K Negative Balance
He had to answer a small questionnaire/set of affirmative responses to be able to trade these option strategies. If he lied on them that is not their responsibility anymore (unfortunately).
theincredulousk··on Reverse Engineering Snapchat: Obfuscation Techniques
The performance impact is not as much as you’d think, speaking from C/C++ land. I had a secured video player that was using these techniques, and even with the dial turned all the way up, it was costing 1-2% CPU and no human-detectable latency
theincredulousk··on Reverse Engineering Snapchat: Obfuscation Techniques
These techniques are largely automated through metadata during a build process. It takes effort to setup, but not nearly as much effort as you think. The effect is asymmetrical- what takes you 1 hour to do costs a reverser 100. At least as time efficient as implementing backend detection algorithms.
theincredulousk··on Reverse Engineering Snapchat: Obfuscation Techniques
Worked with Arxan before. They are legit - what is described here is the tip of the iceberg. Haven’t even gotten into in-memory instruction and data encryption. If you’re dumping the binary you’re likely not even seeing all of what is executing at runtime
← PreviousPage 2 of 5Next →