HNHacker News
TopNewBestAskShowJobs

vonnieda

210 karma · joined January 16, 2013

submissionscomments
vonnieda··on Casio Graphing Scientific Calculator Fx-9860GIII Comes with MicroPython
I agree completely. I am completely willing to spend real money on an iOS app that is as intuitive and powerful as a TI-89 but it just doesn’t seem to exist.
vonnieda··on Graphics for JVM
The author is referring to writing a UI library, not writing an application or UI using an existing UI library.
vonnieda··on I Ripped Out a £6k Lighting System
Are you saying you would hit the physical switch and it wouldn't activate? I don't think I've ever experienced that.

Early on, I would have command failures when the dimmers were powerline only, but with the dual band ones (RF mesh + powerline) that they have been selling for the last 5+ years I don't think I've ever had an error.

vonnieda··on I Ripped Out a £6k Lighting System
I use Insteon dimmers and switches in my house. These replace the wall switch but look basically like a normal wall switch. They use a combination of power line networking and RF mesh networking for automation. This is the second house I've had entirely outfitted with them and I love it.

IMHO it's critical to maintain control at the wall switch - if I am walking into the kitchen and want to turn the lights on, I just hit the switch like any other house. But when I'm in bed and ready to go to sleep I can press one button in the app and all the lights turn off.

Anyone with basic electrical skills can replace a switch in about 15 minutes. I did them all myself in my first house over the course of a few months, and when I moved I hired an electrician for a few hours to just do them all.

The switches and dimmers are about $50 each, but they are highly reliable. I've had one failure out of about 40 total installed over the course of the 12 years I've been using it.

vonnieda··on Show HN: Write a private diary using good old email
That's such a strange coincidence! Do you still use it?
vonnieda··on Show HN: Write a private diary using good old email
It still uses Mongo on Heroku for now - the Postgres changes haven't been pushed yet.

And yes, good point on the README not explaining what it does. Thank you. I'll fix that.

vonnieda··on Show HN: Write a private diary using good old email
I wrote WhoaLife ( https://github.com/vonnieda/WhoaLife ) when OhLife shut down. It's self hosted for privacy and designed for Heroku Free Tier. Takes about 15 minutes and no code to deploy.

I've been using it since OhLife shut down and it completely fills the gap for me.

I recently modernized the code a bit, ported it from Mongo to Postgres and improved the selection of the random entry that is sent to you, but I haven't pushed those changes yet. They'll go out in the next week or so.

vonnieda··on Cycling to work through cavernous limestone mines turned into a business park
Fun fact: Kansas City, MO is full of these caves. You can go play paintball and laser tag there: http://jaegers.com/
vonnieda··on We hired a Japanese moving company [video]
Can you name some companies you've had good experiences with? I'd like to do this for my next move but all I read is horror stories of people's stuff getting held hostage or just lost in the desert.
vonnieda··on LibrePCB: First stable release published
This looks really great! Congrats to the author on reaching this milestone. The library management seems like a great step forward!
vonnieda··on Unboxing Our New Desktop Pick and Place Machine
I'm the founder/author of OpenPnP, which exists to do exactly this. I've been working on the project for about 6 years now and I'm happy to say that lots of hobbyists, small companies, maker spaces, etc. have built and are running OpenPnP based pick and place machines.

It's a harder problem than it seems, as I've found out over the past 6 years. While the basics are quite similar to a 3D printer, PnP has some unique challenges. 3D printing can be relatively inaccurate but still produce a good output since you are working with a pretty "oozy" substance to begin with. PnP has to be pretty accurate across it's entire work surface, though. If the machine is 0.1mm off at any point in it's travel that creates a likelihood that a part will be placed incorrectly. Feeders are also, mechanically, a lot more difficult to get right than it seems like they would be.

In any case, we're having good luck and a lot of success, so if you are interested in DIY / Open Source / Hobby pick and place, please come check it out!

http://openpnp.org

vonnieda··on Introducing the new SourceForge
Google Groups works well for this. I use it for my open source projects. You can interact with it via the web, if you want, but it also has a full mailman style interface, which is how I use it.
vonnieda··on GitHub Thinks I'm a Robot
I understand that fighting spam is difficult; I ran public email servers for years, and I think that Github does a great job at it.

My gripe here is that they didn't notify me before or after hiding my account. I don't expect a human to review the flag and I'm not suggesting they do. I agree, that doesn't scale. But it doesn't take a human to send me an email that says "Your account has been flagged for spam. Please contact support to resolve this issue."

The issue is that if I hadn't happened to log in this morning I would not have known that my account was hidden until I started getting complaints about broken links. Github was returning 404 errors for my repos. That means no one could download code or releases, read Wikis, file Issues, etc. It was like the repos had just been deleted.

My projects are pretty small, comparatively. But imagine if you went to read some docs on Angular or Express or any other large, open source project and you just got a 404 for the entire project? It's pretty scary.

My only ask here is that they notify users that they flag. Nothing more. I think it's a pretty reasonable request. I have since exchanged a couple more emails with them and they have said they'll raise the issue internally.

vonnieda··on GitHub Thinks I'm a Robot
Author here. I agree that they handled it well and quickly. Props for that. I have two main concerns:

1. Why did it happen in the first place? I have a very active account with lots of "human" evidence. If I'd posted a single spammy link or something in a Gist (which I didn't) how does that override the fact that I'd just committed and updated my Wiki 12 hours ago?

2. Why not notify me and let me respond? If the account is flagged, send an email and require me to log in, answer a question, perform a captcha, etc. I'd even be okay with it if they flagged the account first and then sent me an email, but the only way I found out about this is by logging in this morning.

I love Github, but I think this system / policy could use some work.

vonnieda··on What doomed MakerBot? The Osborne effect
The primary advantage is that a 3D printer is truly able to create features in any orientation in 3D while a typical mill cannot. The price of consumables isn't really something I consider important, especially when prototyping.

The thing that a lot of people don't realize about traditional machining operations is just how long they take to set up. I didn't, myself, until I bought a CNC mill. I thought it was just a matter of sticking a big hunk of metal in it, hitting Go and then coming back when it's done.

The first problem is that for a typical 3D axis milling machine you have to find a way to mount the material you intend to cut without getting in the way of the cutter, and if your part is at all complex this can be very tricky. Different materials and thicknesses all require different methods of mounting, and learning how to mount and setup a part is an education in itself.

The second problem is that a 3 axis mill can really only cut down. That means if you want a hole in the up/down Z axis, you are fine. If you want one in the X/Y axes you are out of luck. You have to finish your Z axis operations, unmount the part, turn it, find a new way to mount it, zero the machine to the new part configuration and then do more operations. If you have a part that has, for instance, mounting holes on several sides you are looking at a LOT of manual work to complete that part. And each time you remount the part you have to be able to tell the machine exactly how the part is mounted so that everything lines up.

Industrial machine shops get around this by using 5 or more axis mills. These are insanely expensive and not really available to the home / hobby engineer, although I am quite interested in what http://www.pocketnc.com/ is doing.

3D printers, on the other hand, are truly 3D. You can have features in almost any configuration and it's no more difficult to print than a simple cube. It is literally a matter of starting it up and coming back when it's done.

I don't think 3D printing is the be all end all of machining, especially FFF, but for the home or hobby engineer it's an incredibly powerful and easy to use technology right now.

vonnieda··on What doomed MakerBot? The Osborne effect
I was in the same boat, until very recently.

I am the founder of OpenPnP, an Open Source SMT pick and place platform. I eschewed 3D printing for my design work for several years thinking that it was not accurate enough, not strong enough, etc. Having experience with CNC mills I kept comparing 3D printed parts to ones cut accurately from aluminum and found them lacking.

What I recently came to realize is that the power of 3D printing is in it's instant turnaround and the ability to quickly iterate. Now, I design my parts for 3D printing. They look and function differently than they would if I had cut them from aluminum and I have to take the limitations of 3D printing into account, but they work. And most importantly, I can test a new design simply by hitting "Print" and waiting an hour or two.

I agree that much of the consumer market is dominated by people who buy a 3D printer and then use it to print trinkets until they get bored, but there are also a lot of people out there who are engineering new devices and machines using the ability to quickly test new designs on a 3D printer.

← PreviousPage 2 of 2