The big mistake IMO was a lack of obvious keying. Very little stops me from using that 2w-capacity keyboard cable to try to charge my laptop. If we're lucky, there's signaling at the device to tell me what's wrong, but if they had made a different plug on the 100W cable, it would eliminate a lot of cockpit errors.
Having one cable for everything is a huge red herring. If you need a keyboard and a power brick and an external hard drive, you need three cables. It doesn't matter if they're different, as long as the OEM isn't pulling some Apple-style "one single port is enough" BS.
No thank you. The drama around USB-C is insanely overblown; the vast majority of use cases are fine with the 60 watt + 480 mbps required minimum configuration for USB-C cables. In the few rare exceptions where you need >60 watts or higher speed, you're generally going to have purpose-built hardware anyway, so just devoting a special cable to that isn't such a big deal.
But on the other hand doubling the power wire thickness and leaving the signals wires untouched shouldn't add more than 10-20% to the price of the cable.
> The big mistake IMO was a lack of obvious keying. Very little stops me from using that 2w-capacity keyboard cable to try to charge my laptop. If we're lucky, there's signaling at the device to tell me what's wrong, but if they had made a different plug on the 100W cable, it would eliminate a lot of cockpit errors.
Every cable supports at least 60 watts. It's not a big deal if you use the wrong one to charge with.