jayyhu

The author points out that his changes have already been upstreamed to https://github.com/rp-rs/rp-hal

For the layman, 0 degrees celsius is also a good proxy for the distance to "room temperature" superconductor.

AFAIK the Section 301 tariff (and increases) only applies to parts imported from China/HK. There are lots of manufacturers on DigiKey that make their parts from elsewhere where these tariffs are not assessed. As a data point, I recently bought a bunch of Lite-on LEDs on DK, their COO was Thailand, and I wasn't tariffed for those parts.

Consider a scenario where you're editing a function:

  function foo() { return a*2.1^2+0.52/2 }

So you do a find-all regex "1.*5" and delete all matching occurrences (à la CRISPER) to get:

  function foo() { return a*2.2/2 }

But unbeknownst to you, the code is littered with a bunch of commented out versions of the same function you're trying to edit:

  /* function foo() { return a*1.5/2.1 } */
  /* function foo() { return a*1.95/2.4 } */

And now those commented out versions now become:

  /* function foo() { return a*/2.1 } */
  /* function foo() { return a*/2.4 } */

And now the whole program doesn't compile anymore--or your patients get Leukemia. Oops.

While it might be hard for the US to make lithium batteries that are competitive economically, there are still many countries in the world that can make them economically that are not China, eg. SK, Japan, Taiwan, and the rest of SEA. For Skydio, surviving these sanctions is just a matter of moving their supply chain away from China.

From the article's opening sentence, it's clear that they are being sanctioned for doing business with Taiwan's Fire Agency, and not for any military reasons.

  A few weeks ago, China announced sanctions on Skydio for selling drones to Taiwan, where our only customer today is the National Fire Agency.

Sanction aside, this action is a wake-up call for all US based companies operating in geopolitically sensitive industries that they absolutely need to diversify their supply chain away from China.

And in terms of the sanction itself, it’s definitely a reasonable response by China, given the fact that DJI is heavily sanctioned by the US government.

The actual paper describing the construction of the MUSE Stellarator: https://www.cambridge.org/core/journals/journal-of-plasma-ph...

I want to clarify that they actually did build a transistor-like device, and not just hypothesize about it. I missed section 3.2 when I initially skimmed the paper, which demonstrates and shows the results of a working “transistor”.

Unfortunately I can’t edit my original post, so apologies for causing any confusion.

It looks like the editors have amended the title of their article since this was initially posted. The original title was just “3D-printed Active Electronics”

Reading the article, it looks like so far they only have a working resettable fuse (a passive device), and only hypothesize that a transistor was possible with the copper-infused PLA filament. So no actual working active electronics.

And from the paper linked in the article[1], it seems the actual breakthrough is the discovery that copper-infused PLA filament exhibits a PTC-effect, which is noteworthy, but definitely not "3D-Printed Active Electronics" newsworthy.

[1] https://www.tandfonline.com/doi/full/10.1080/17452759.2024.2...

They made a video that explains how to navigate the roundabout, and shows what it will actually look like (with yield markings)[1]

[1]: https://youtu.be/07_m7HHiZRw

Yep, they explicitly call out that the onboard voltage regulator can work with a single lithium ion cell.

You're right, after re-reading the Power section on the datasheet it seems connecting 5V to the VREG_VIN should suffice to power the digital domains, but if you want to use the ADC, you still need a external 3.3V source.

Edit: See comment below; The RP2350 can be powered by a 5V supply.

Why Germany? Both Netflix and Broadcom are American companies, so isn’t it more logical to pick a venue in the US? Was Broadcom’s case so flimsy (with regards to US patent law) that they had to find an overseas jurisdiction to get a favorable ruling?

The alternative is to do what JS does: https://www.destroyallsoftware.com/talks/wat

The STM32 F0/G0/C0 lines come to mind. More I/O, more peripherals and built-in flash.

For hobbyist levels, buying 1-10 pcs they are comparable in price to an RP2040 + SPI flash. However at volume pricing, the STM32 MCU's can be cheaper than just the RP2040 itself. I do think Raspberry Pi needs to figure out volume pricing if they want to be competitive for anything that's not just hobbyists.

Also you could potentially damage the on-board voltage converter/regulator, since most aren’t designed to be back-driven from their outputs.

He also has a video on YouTube for Conical slicing (for those that prefer watching videos): https://www.youtube.com/watch?v=1i-1TEdByZY

To add to "capital-intensive": the regulatory framework right now (in the US) for drone delivery is uncertain at best. While most of the rules & regs to enable drone delivery is already finalized & published, a few very important ones (such as BVLOS - beyond visual line-of-sight) have yet been finalized, and thus need one-off waivers from the FAA to allow. And getting those one-off waivers is what eats a lot of time & money.

I think in a more fair world, they should be forced to recall all falsely labeled "Made In USA" products and offer to replace them with real products made in the USA.

They even have a plugin to get Kerbal Space Program telemetry[1]! Could be useful I guess if you want to play without the HUD on one screen and have all the mission info on a second screen.

[1] https://github.com/hudsonfoo/kerbal-openmct

Also helpful for Stereolithographic printers (SLA/DLP/LCD), since they also don't have inter-layer adhesion issues like extrusion printers.

NACA and the other published airfoils[1] are generally a good starting point for hobbyist/RC folks. However if you want to eke out that last 5% bit of performance (ie. you are a company/institution), you would start with one of the above airfoils and optimize them to fit your flight envelope & mission profile. Here's a neat video of optimizing a round profile into an airfoil optimized for supersonic speeds [2].

[1] http://airfoiltools.com [2] https://www.youtube.com/watch?v=FHYTBguMfWc

While Prusas definitely contain Chinese parts, if your goal is to avoid buying Chinese then buying a product with a diversified supply chain is certainly preferable to buying a product that is 100% from China.

Also Delta Electronics is a Taiwanese company[1]

[1] https://www.deltaww.com/en-US/about/aboutProfile

On a related note, the renowned North American X-15[1] was one of the very few rocket/plane powered by a rocket engine[2] that consumed ammonia as fuel.

[1] https://en.wikipedia.org/wiki/North_American_X-15

[2] https://en.wikipedia.org/wiki/Reaction_Motors_XLR99

In the same vein: The Sacred Rac https://laulima.hawaii.edu/access/content/user/millerg/ANTH_...

Indeed, the project's compiled binary doesn't contain malicious code, but the act of compiling the project causes the malicious code (which is just a binary blob) to execute and infect the system.

No risk as previous replier mentioned. I provided only the repo names for people who are afraid that they might have dependencies on an infected project.