1,614 karma · joined September 22, 2008
Thanks.
Pics are on pages 25 and 27.
Thermodynamics arguments are always good but you really need to understand that most of them describe closed systems under equilibrium. Real world is messier and if your understanding of thermodynamics is shaky its easy to get to wrong conclusions. Black and grey body discussion is in same realm, so we will avoid it here.
Let's consider piece of wood and try to see what it takes to combust it. We need two things - oxygen and high enough temperature. We are keeping this piece of wood in air, so we have oxygen. The temperature is how fast particles that compose piece of wood are moving. The wood consists of molecules, which are in turn consist of atoms. You can imagine a molecule is a bunch of atoms connected with each other by springs (the springs are created by electromagnetic forces when atoms lend and borrow electrons). The higher the temperature - the larger oscillations of these springs. When the temperature is high enough some of these springs can break and combine with oxygen to release energy - combustion.
Suppose light strikes some piece of wood. What happens? Photons hit molecules and they can interact with an electron or proton - they exchange momentum (and energy), which means that one of the atoms in a molecule gets a bump - springs would start oscillating harder.
Note, low energy photons cannot swing springs a lot. We need photons of high energy to swing spring to high temperature (ok - this part is too oversimplified, I can extend on this if there are questions). The energy of photons depends on their waivelength - the shorter waivelength - the more energetic photons. So we need photons with energy that could break molecular bonds (springs) to be able to heat up to combustion temperature. Visible light definitely has photons of such energy.
So we start sending light down our piece of wood, it starts heating up. But it sits in air and probably fixed by some supporting stand. This piece of wood starts exchanging heat with surrounding materials. To be able to overcome this we need to send lots of photons on this piece of wood. How do we do this? We use lens to collect the photons from broader area and send it down to the wood. Note that it doesn't matter where photons came from, were they scattered or produced by sun, what temperature of scattering surface was, not even what temperature of sun was. All what is matter - can we collect enough high energy photons. So we would need to calculate what is energy flux of visible light photons at the surface earth and see if we could come up with a lens to focus these photons on piece of wood to create sufficient intensity.
We know that we can see Moon in visible light, so it does sends bunch of energetic photons to us. All these photon are coming from moon direction (so we don't care that moon scatters them in other directions as well). So the task is to find what is the energy flux of these photons at earth surface and what size of lens we would need to get sufficient intensity.
1. As you mentioned, the moon acting as greybody absorbs part of the radiation and scatters the rest. In the second sentence you mention that the moon's temperature is enough to describe this radiation. In the third sentence you mention that you don't need moon's temperature to do that. So which is which?
Correct answer - to describe re-radiated energy we need moon's temperature, but to describe scattered we don't. We can ignore re-radiated, since it is not visible light and not hot enough. We can use scattered, since it is visible and hot enough.
2. Not sure why it is "No" if you are agreeing with me. Also not sure what you mean by temperature represented by total radiation (as you mentioned in part 1 there are two parts - re-radiated - at temperature of the moon, and scattered - at temperature of Sun).
To see that there is a problem with your argument - first note that the spectrum of black-body radiation dominates spectrum of grey-body radiation [1] (i.e. if black-body radiation is not in visible spectrum, the grey body will not be in visible as well). Then think that at 100 degrees C there would be no visible radiation. So the light that we see from moon cannot be this cold. Its coming from sun and it is hot enough (since it is in visible spectrum).
[1] https://claesjohnsonmathscience.wordpress.com/2012/04/21/gre...
To have a combustion we need two things - light of high enough temperature and light of high enough energy concentration. The two are not the same. All visible light has high enough temperature. However the concentration is the problem
Why do we need high concentration for combustion? If we don't supply enough energy to compensate for heat loss, the area will never get hot enough.
By the way - interesting corollary of this is that even with sun lights - if we have a mechanism that takes away heat fast enough (say by blowing cold air at the area) we would not be able to reach combustion with large mirror in direct sunlight.
Entropy argument - correct in the sense that using radiation from black body we cannot use lenses to heat another body to the temperature higher than original. Easy to understand why - the first body has a temperature, radiation has the same temperature, if we apply the radiation to another object it will not heat up more than the radiation's temperature.
Also the argument about impossibility of concentrating light into a dot is correct (although even if it were possible we still would not be able to get higher temperature - light would not be energetic enough for that). The important part is - we could concentrate light into a dot only if it consist of parallel rays - i.e. only for an object that is infinitely far away.
Moon surface temperature argument is incorrect. A body at 100 degrees Celsius does not radiate in visible spectrum, so the light we see is not produced by Moon's temperature. It is reflected Sun light. So Moon's temperature doesn't matter. Moon surface does absorbs some light, changing spectral composition from about 5.7kK (Sun's surface temperature) to about 4kK. So we should consider moon to be a part of optics not emitter.
Hence the question is now - can we concentrate moon light enough so that intensity at the concentration point is higher than thermal loss into environment (only then we will be able to raise temperature in the concentration area enough for combustion - remember that light is "hot" enough for this)? I don't have answer for that - need to do calculations. What can be a deal breaker? Remember that Moon is much closer than Sun, so rays come to us even less parallel, so the area into which we can concentrate light reflected from the Moon is even larger than the Sun's, so together with lower intensity of light from Moon we might have trouble achieving the necessary intensity for combustion. However big enough lens probably will work.
And yes - I'm a physicist by training.
However I totally dig what 538 does and appreciate their analysis. I understand that there is a complex underlying model with many parameters taken subjectively. The results of Monte Carlo runs of this model are very interesting to me. The fact that they describe distribution of outcomes and not just a single number is important property of a Monte Carlo model and I would have an issue if that wouldn't provide that info. If I would like to analyze complex event that has lots of moving parts and uncertainties I would also build a model to see what kind of distribution I would get. The fact that somebody published results of their model is quite useful.
The analogy would be European and American weather models - no one say that their results are exact and everybody understand that uncertainty in result comes from inherent uncertainty of initial state as well as shortcuts and approximations each of the model takes. No one says that the results of these models are useless because of that. And everybody finds it valuable if weather forecast predicts rain tomorrow with 40% chance. So I don't see how political prediction is only valuable (by the words of the author) if it comes without probabilities attached to it.