HNHacker News
TopNewBestAskShowJobs

kanetw

468 karma · joined April 10, 2016

submissionscomments
kanetw··on Show HN: Simula One – Portable Linux VR Computer
Communicating with the outside world, basically. DND signs, pixel-y eyes, etc.
kanetw··on Show HN: Simula One – Portable Linux VR Computer
The hand tracking is Ultraleap's assuming they actually deliver the Linux software at some point in the next few months. We're considering backups like using mmWave RADAR. It shouldn't be too intensive (at least not noticeable so far), but I'll double check.

The LED matrix display is for the outside. In both the founders' and regular, the internal display are Sharp 2448x2448 LCDs.

The regular edition will have a LED matrix display only if we sell enough units, basically.

I think I heard about VR-OS but haven't looked deeper; focused on the HW right now.

Steam works on Nix afaik (although George is the main Nix user); a Windows VM... should work?

kanetw··on Show HN: Simula One – Portable Linux VR Computer
Correct, although you'll need to make sure the login/boot process works without an external display.
kanetw··on Show HN: Simula One – Portable Linux VR Computer
Battery life isn't in the specs yet because it's TBD. We're targeting 3 hours, but that's not a final number and might change if we notice that it's too heavy or we still have usable mass budget etc.
kanetw··on Show HN: Simula One – Portable Linux VR Computer
Huh. That's not how I take them off, but I'm also mindful about optics damage.

Some kind of shutter is a bit hard to do due to space constraints, but I'll see what can be done.

kanetw··on Show HN: Simula One – Portable Linux VR Computer
It gets toasty but we're including this in the thermal solution-- compute pack on the back of your head separate from the rest of the headset, airflow going away from your head, maybe even additional insulation if there's too much conductive heat transfer through the padding.
kanetw··on Show HN: Simula One – Portable Linux VR Computer
You can go a fair bit smaller, but the primary size driver is the optics. Pancake lenses, which combine refraction with reflection, allow the depth to be much smaller while having similar optical power. However they cause image artifacts and have really poor light transmission, so it takes a good amount of R&D to get them good enough. A traditional refractive system, especially for a high-fidelity device, is a better choice for now than optimizing for size. That can come later.
kanetw··on Show HN: Simula One – Portable Linux VR Computer
I like the concept of the Framework, and we're similarly big on being open/repairable/etc.
kanetw··on Show HN: Simula One – Portable Linux VR Computer
We do have a lot of considerations for latency. Early footage is well, early.

Head/room tracking is being worked on, but I'll keep people updated with results.

AR latency... we're basically just brute forcing it. >90 FPS cameras, dump the data uncompressed via PCIe Gen3 x4 onto the compute pack, display it. Still working on the hardware verification but it should be doable within a frame assuming there isn't a hidden bottleneck somewhere.

kanetw··on Show HN: Simula One – Portable Linux VR Computer
Yeah, unfortunately that's the annoying thing with preorder products. A fully integrated unit that would be representative of a final device will take a while for sure. My timeline is roughly 2 months for a reviewable VR-only unit, another 1-2 for VR+AR, and then integrate the compute pack.
kanetw··on Show HN: Simula One – Portable Linux VR Computer
Head tracking (positional) is 6DOF. Got lost in some editing, I'll re-add it.
kanetw··on Show HN: Simula One – Portable Linux VR Computer
The NUC is actually a bit subsidized compared to the tethered version.
kanetw··on Show HN: Simula One – Portable Linux VR Computer
We haven't finalized on the mmWave yet, but there's standards for human body exposure that we will of course meet. IEC 62311, ICNIRP guidelines, and so on.

The mmWave transmitter is directional, and the basic restrictions for local exposure in ICNIRP for the general public is at 20W/m2. The transmitter EIRP is 15dBm, so you'd need to put the entire transmitter's EIRP into a 4cm * 4cm target to exceed those.

kanetw··on Show HN: Simula One – Portable Linux VR Computer
Nice! Fair warning, you'll probably have reduced AR mode fidelity in tethered mode unless you have a Thunderbolt/PCIe link. Our compute pack uses a PCIe Gen3 x4 link to the front FPGA to get uncompressed image data (compression is something I want to avoid due to latency and memory bandwidth issues).

Ideally we would have a way to compose the AR image in the front, but that's a massive engineering challenge.

kanetw··on Show HN: Simula One – Portable Linux VR Computer
Funny anecdote, we had no AR mode planned originally. Both me and George were completely fine without looking at the keyboard, so it didn't occur to us.

Then our ME demo'd the software and couldn't type. We went "oh, fuck, what if someone needs to actually see their keyboard."

And, well, we don't do things by half measures, so proper AR passthrough it is.

kanetw··on Show HN: Simula One – Portable Linux VR Computer
We have a LED display baseline in the founders edition, and it might trickle down into the base edition if we have enough sales. Definitely something we thought about in terms of expressiveness.
kanetw··on Show HN: Simula One – Portable Linux VR Computer
Yeah, I've been trying to find solutions with George as to how to highlight we're a VR computer better. Getting the messaging right is tricky.
kanetw··on Show HN: Simula One – Portable Linux VR Computer
Godot was mostly chosen for expedience and hackability. With e.g. StardustXR existing now, it's not impossible we'll do something new down the line.

Curved panels etc are doable. We primarily use Haskell as a "scripting" language for at least some type safety, but it should be fairly manageable to get into.

kanetw··on Show HN: Simula One – Portable Linux VR Computer
Absolutely. I think that proposition was incredibly clear back when they used to offer Oculus for Business, which was like $800-900? Now they don't even offer that.
kanetw··on Show HN: Simula One – Portable Linux VR Computer
Also, I generally try to limit third party stuff because it's just super annoying. Never mind that I use uMatrix and having to enable 20 different hosts makes me cranky.

About the only third party thing we have is an invoicing app I installed temporarily.

kanetw··on Show HN: Simula One – Portable Linux VR Computer
Maybe? Do other headsets work on the MBP? There's nothing blocking it, but it's not primary compatibility target. That being said, everything will be open source, so it shouldn't be too difficult to add it in if we don't have the resources for it.
kanetw··on Show HN: Simula One – Portable Linux VR Computer
We might end up adding a third strap. More info on that in the upcoming 2-3 months.

Weight is still being worked on. Our target is 800g, but that might change depending on what tradeoffs we want to make or what comfort testing tells us.

kanetw··on Show HN: Simula One – Portable Linux VR Computer
I'll relay it to George. Thanks for the feedback, this kind of thing is always what falls through the cracks when you write sales copy.
kanetw··on Show HN: Simula One – Portable Linux VR Computer
Yeah, pretty much. I think you can mitigate it a bit with clever tricks, but it's a lot of extra effort we'd rather not deal with this early on.

Also, bandwidth is the big blocker. Compression adds latency and reduces quality, and the amount of data we're pushing is really high (27Gbps uncompressed)

kanetw··on Show HN: Simula One – Portable Linux VR Computer
Thank you! It was pretty exciting seeing your name on the order list.

I guess it comes with the territory of selling a product that eventually you see a name that you recognize :)

kanetw··on Show HN: Simula One – Portable Linux VR Computer
Thanks. This is exactly why we're making our own device--we even talked to Varjo, but no interest in Linux compat.

The problem with getting SimulaVR (Simula One will be compatible) to run is the lack of a WM API. Your best bet in that regard would be to get Microsoft to expose it or do WMR compatibility? It's a bit out of scope for us, we're focusing on OpenXR as #1 and SteamVR as fallback.

kanetw··on Show HN: Simula One – Portable Linux VR Computer
You do. We sell a tethered edition that's just the headset.
kanetw··on Show HN: Simula One – Portable Linux VR Computer
Basically everything is modular. It's a huge design boon to be able to split things up and it comes naturally with reparability and to some extent upgradability.

About the only thing I would be careful about replacing (but we'll still be offering) is the optical assembly, as dust will be pretty annoying if it gets in. We're planning a clean room just to handle the dust-sensitive parts of our equipment (image sensors, displays/optics, etc)

kanetw··on Show HN: Simula One – Portable Linux VR Computer
I'm the other co-founder.

Yes, about as easy as opening a laptop. Unscrew some screws, lift a cover, install a new M.2 SSD or whatever. This is a picture of the "standard" assembly: https://i.kane.cx/NFIpf4 -- compute element slots into a connector, and there's the standard M.2 slot etc. Ours won't be too different, just a different form factor/connectors/additional features.

We're committing to selling all custom parts for at least a few years, but I can't give a hard number on how long. I'd say 4 years for sure.

kanetw··on Show HN: Simula One – Portable Linux VR Computer
You shouldn't take it off outdoors with the lenses pointing at the sun, no. Ambient light will be fine.

Also don't stare at the sun with the cameras. Although if you do, they'll be replaceable.

← PreviousPage 4 of 9Next →